arm: dts: tx6: add some aliases and a label for backlight@0

[karo-tx-linux.git] / Documentation / s390 / cds.txt

diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt
index 58919d6a593ae0b0f91badb0e1e66d424f735738..480a78ef5a1e4240ced3abf810465c00a937f235 100644 (file)
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.txt
@@ -98,7 +98,7 @@ platform. Some of the interface routines are specific to Linux/390 and some
 of them can be found on other Linux platforms implementations too.
 Miscellaneous function prototypes, data declarations, and macro definitions
 can be found in the architecture specific C header file
-linux/include/asm-s390/irq.h.
+linux/arch/s390/include/asm/irq.h.
 
 Overview of CDS interface concepts
 
@@ -133,7 +133,7 @@ During its startup the Linux/390 system checks for peripheral devices. Each
 of those devices is uniquely defined by a so called subchannel by the ESA/390
 channel subsystem. While the subchannel numbers are system generated, each
 subchannel also takes a user defined attribute, the so called device number.
-Both subchannel number and device number cannot exceed 65535. During driverfs
+Both subchannel number and device number cannot exceed 65535. During sysfs
 initialisation, the information about control unit type and device types that 
 imply specific I/O commands (channel command words - CCWs) in order to operate
 the device are gathered. Device drivers can retrieve this set of hardware
@@ -286,10 +286,10 @@ first:
             timeout value
 -EIO:       the common I/O layer terminated the request due to an error state
 
-If the concurrent sense flag in the extended status word in the irb is set, the
-field irb->scsw.count describes the number of device specific sense bytes
-available in the extended control word irb->scsw.ecw[0]. No device sensing by
-the device driver itself is required.
+If the concurrent sense flag in the extended status word (esw) in the irb is
+set, the field erw.scnt in the esw describes the number of device specific
+sense bytes available in the extended control word irb->scsw.ecw[]. No device
+sensing by the device driver itself is required.
 
 The device interrupt handler can use the following definitions to investigate
 the primary unit check source coded in sense byte 0 :