#!/bin/bash
+# Tool mainly for U-Boot Quality Assurance: build one or more board
+# configurations with minimal verbosity, showing only warnings and
+# errors.
+#
+# There are several ways to select which boards to build.
+#
+# Traditionally, architecture names (like "powerpc"), CPU family names
+# (like "mpc83xx") or board names can be specified on the command
+# line; without any arguments, MAKEALL defaults to building all Power
+# Architecture systems (i. e. same as for "MAKEALL powerpc").
+#
+# With the introduction of the board.cfg file, it has become possible
+# to provide additional selections. We use standard command line
+# options for this:
+#
+# -a or --arch : Select architecture
+# -c or --cpu : Select CPU family
+# -s or --soc : Select SoC type
+# -v or --vendor: Select board vendor
+#
+# Selections by these options are logically ANDed; if the same option
+# is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
+# will select all configurations where the vendor is either FOO or
+# BAR. Any additional arguments specified on the command line are
+# always build additionally.
+#
+# Examples:
+#
+# - build all Power Architecture boards:
+#
+# MAKEALL -a powerpc
+# or
+# MAKEALL --arch powerpc
+# or
+# MAKEALL powerpc
+#
+# - build all PowerPC boards manufactured by vendor "esd":
+#
+# MAKEALL -a powerpc -v esd
+#
+# - build all PowerPC boards manufactured either by "keymile" or
+# "siemens":
+#
+# MAKEALL -a powerpc -v keymile -v siemens
+#
+# - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
+#
+# MAKEALL -c mpc83xx -v freescale 4xx
+#
+#########################################################################
+
+SHORT_OPTS="a:c:v:s:"
+LONG_OPTS="arch:,cpu:,vendor:,soc:"
+
+# Option processing based on util-linux-2.13/getopt-parse.bash
+
+# Note that we use `"$@"' to let each command-line parameter expand to a
+# separate word. The quotes around `$@' are essential!
+# We need TEMP as the `eval set --' would nuke the return value of
+# getopt.
+TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
+ -n 'MAKEALL' -- "$@"`
+
+if [ $? != 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi
+
+# Note the quotes around `$TEMP': they are essential!
+eval set -- "$TEMP"
+
+SELECTED=''
+
+while true ; do
+ case "$1" in
+ -a|--arch)
+ # echo "Option ARCH: argument \`$2'"
+ if [ "$opt_a" ] ; then
+ opt_a="${opt_a%)} || \$2 == \"$2\")"
+ else
+ opt_a="(\$2 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -c|--cpu)
+ # echo "Option CPU: argument \`$2'"
+ if [ "$opt_c" ] ; then
+ opt_c="${opt_c%)} || \$3 == \"$2\")"
+ else
+ opt_c="(\$3 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -s|--soc)
+ # echo "Option SoC: argument \`$2'"
+ if [ "$opt_s" ] ; then
+ opt_s="${opt_s%)} || \$6 == \"$2\")"
+ else
+ opt_s="(\$6 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -v|--vendor)
+ # echo "Option VENDOR: argument \`$2'"
+ if [ "$opt_v" ] ; then
+ opt_v="${opt_v%)} || \$5 == \"$2\")"
+ else
+ opt_v="(\$5 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ --)
+ shift ; break ;;
+ *)
+ echo "Internal error!" >&2 ; exit 1 ;;
+ esac
+done
+# echo "Remaining arguments:"
+# for arg do echo '--> '"\`$arg'" ; done
+
+FILTER="\$1 !~ /^#/"
+[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
+[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
+[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
+[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
+
+if [ "$SELECTED" ] ; then
+ SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg)
+
+ # Make sure some boards from boards.cfg are actually found
+ if [ -z "$SELECTED" ] ; then
+ echo "Error: No boards selected, invalid arguments"
+ exit 1
+ fi
+fi
+
+#########################################################################
+
# Print statistics when we exit
trap exit 1 2 3 15
trap print_stats 0
}
boards_by_arch() { boards_by_field 2 "$@" ; }
boards_by_cpu() { boards_by_field 3 "$@" ; }
+boards_by_soc() { boards_by_field 6 "$@" ; }
#########################################################################
## MPC5xx Systems
ap926ejs \
ap946es \
ap966 \
+ aspenite \
cp920t \
cp922_XA10 \
cp926ejs \
## AT91 Systems
#########################################################################
-LIST_at91=" \
- afeb9260 \
- at91cap9adk \
- at91rm9200dk \
- at91rm9200ek \
+LIST_at91="$(boards_by_soc at91)\
+ $(boards_by_soc at91rm9200)\
at91sam9260ek \
at91sam9261ek \
at91sam9263ek \
at91sam9g20ek \
at91sam9m10g45ek \
at91sam9rlek \
- cmc_pu2 \
CPUAT91 \
CPU9260 \
CPU9G20 \
- csb637 \
- eb_cpux9k2 \
- kb9202 \
- meesc \
- mp2usb \
- m501sk \
- otc570 \
- pm9261 \
- pm9263 \
pm9g45 \
SBC35_A9G20 \
TNY_A9260 \
## Xscale Systems
#########################################################################
-LIST_pxa="$(boards_by_cpu pxa)
- polaris \
- trizepsiv \
- vpac270_nor \
- vpac270_onenand \
-"
+LIST_pxa="$(boards_by_cpu pxa)"
LIST_ixp="$(boards_by_cpu ixp)
pdnb3 \
## i386 Systems
#########################################################################
-LIST_x86="$(boards_by_arch i386)
- sc520_eNET \
-"
+LIST_x86="$(boards_by_arch i386)"
#########################################################################
## Nios-II Systems
## Blackfin Systems
#########################################################################
-LIST_blackfin="$(boards_by_arch blackfin)
- bf527-ezkit-v2
-"
+LIST_blackfin="$(boards_by_arch blackfin)"
#########################################################################
## SH Systems
#########################################################################
-LIST_sh2=" \
- rsk7203 \
-"
-LIST_sh3=" \
- mpr2 \
- ms7720se \
-"
+LIST_sh2="$(boards_by_cpu sh2)"
+LIST_sh3="$(boards_by_cpu sh3)"
+LIST_sh4="$(boards_by_cpu sh4)"
-LIST_sh4=" \
- ms7750se \
- ms7722se \
- MigoR \
- r7780mp \
- r2dplus \
- sh7763rdp \
- sh7785lcr \
- ap325rxa \
- espt \
-"
-
-LIST_sh=" \
- ${LIST_sh2} \
- ${LIST_sh3} \
- ${LIST_sh4} \
-"
+LIST_sh="$(boards_by_arch sh)"
#########################################################################
## SPARC Systems
#-----------------------------------------------------------------------
-#----- for now, just run PowerPC by default -----
+# Build target groups selected by options, plus any command line args
+set -- ${SELECTED} "$@"
+# run PowerPC by default
[ $# = 0 ] && set -- powerpc
-
build_targets "$@"