blackfin: Move blackfin serial driver out of blackfin arch folder.

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index e0f2c86ae757f23775c9592ade1f1cfc8a484f06..dbc4b709b6a7315506937b59e22774adec4ca67a 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -183,6 +183,16 @@ endif
 # load other configuration
 include $(TOPDIR)/config.mk
 
+# Targets which don't build the source code
+NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+
+# Only do the generic board check when actually building, not configuring
+ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
+ifeq ($(findstring _config,$(MAKECMDGOALS)),)
+$(CHECK_GENERIC_BOARD)
+endif
+endif
+
 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
 # that (or fail if absent).  Otherwise, search for a linker script in a
 # standard location.
@@ -310,7 +320,7 @@ endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
 LIBS-y += drivers/sound/libsound.o
-LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
+LIBS-y += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
@@ -402,8 +412,10 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
-ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+ifneq ($(CONFIG_SPL_TARGET),)
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
+endif
 
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
@@ -552,6 +564,18 @@ endif
 $(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
                cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
 
+# PPC4xx needs the SPL at the end of the image, since the reset vector
+# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
+# and need to introduce a new build target with the full blown U-Boot
+# at the start padded up to the start of the SPL image. And then concat
+# the SPL image to the end.
+$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+               tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
+                       of=$(obj)u-boot-pad.img 2>/dev/null
+               dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
+                       conv=notrunc 2>/dev/null
+               cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
                cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \