CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls)
that work for multiple fs types
+ CONFIG_CMD_FS_UUID * Look up a filesystem UUID
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
CONFIG_CMD_FAT * FAT command support
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
- CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION
+ CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
Address, size and partition on the MMC to load U-Boot from
when the MMC is being used in raw mode.
CONFIG_SPL_FAT_SUPPORT
Support for fs/fat/libfat.o in SPL binary
- CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
- Filename to read to load U-Boot when reading from FAT
+ CONFIG_SPL_EXT_SUPPORT
+ Support for EXT filesystem in SPL binary
- CONFIG_SPL_FAT_LOAD_KERNEL_NAME
+ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
+ Filename to read to load U-Boot when reading from filesystem
+
+ CONFIG_SPL_FS_LOAD_KERNEL_NAME
Filename to read to load kernel uImage when reading
- from FAT (for Falcon mode)
+ from filesystem (for Falcon mode)
- CONFIG_SPL_FAT_LOAD_ARGS_NAME
+ CONFIG_SPL_FS_LOAD_ARGS_NAME
Filename to read to load kernel argument parameters
- when reading from FAT (for Falcon mode)
+ when reading from filesystem (for Falcon mode)
CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
Set this for NAND SPL on PPC mpc83xx targets, so that
Support for the MTD subsystem within SPL. Useful for
environment on NAND support within SPL.
+ CONFIG_SPL_NAND_RAW_ONLY
+ Support to boot only raw u-boot.bin images. Use this only
+ if you need to save space.
+
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
Set for the SPL on PPC mpc8xxx targets, support for
drivers/ddr/fsl/libddr.o in SPL binary.
make O=/tmp/build NAME_defconfig
make O=/tmp/build all
-2. Set environment variable BUILD_DIR to point to the desired location:
+2. Set environment variable KBUILD_OUTPUT to point to the desired location:
- export BUILD_DIR=/tmp/build
+ export KBUILD_OUTPUT=/tmp/build
make distclean
make NAME_defconfig
make all
-Note that the command line "O=" setting overrides the BUILD_DIR environment
+Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment
variable.