XWAY SoCs for booting from NOR flash. The U-Boot image needs to
be swapped if a flash programmer is used.
+- ARM options:
+ CONFIG_SYS_EXCEPTION_VECTORS_HIGH
+
+ Select high exception vectors of the ARM core, e.g., do not
+ clear the V bit of the c1 register of CP15.
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
fdt_high - if set this restricts the maximum address that the
flattened device tree will be copied into upon boot.
+ For example, if you have a system with 1 GB memory
+ at physical address 0x10000000, while Linux kernel
+ only recognizes the first 704 MB as low memory, you
+ may need to set fdt_high as 0x3C000000 to have the
+ device tree blob be copied to the maximum address
+ of the 704 MB low memory, so that Linux kernel can
+ access it during the boot procedure.
+
If this is set to the special value 0xFFFFFFFF then
the fdt will not be copied at all on boot. For this
to work it must reside in writable memory, have