Merge branch 'u-boot/master' into 'u-boot-arm/master'

[karo-tx-uboot.git] / README

diff --git a/README b/README
index d832bcbb7c62e5bef5dbac9d36ebc6c4a6e60495..b1b3e1788ec92d8ba088dab91175dfb1a44e2e26 100644 (file)
--- a/README
+++ b/README
@@ -201,7 +201,6 @@ Directory Hierarchy:
       /mpc5xx          Files specific to Freescale MPC5xx CPUs
       /mpc5xxx         Files specific to Freescale MPC5xxx CPUs
       /mpc8xx          Files specific to Freescale MPC8xx CPUs
-      /mpc8220         Files specific to Freescale MPC8220 CPUs
       /mpc824x         Files specific to Freescale MPC824x CPUs
       /mpc8260         Files specific to Freescale MPC8260 CPUs
       /mpc85xx         Files specific to Freescale MPC85xx CPUs
@@ -844,6 +843,7 @@ The following options need to be configured:
                CONFIG_CMD_FDOS         * Dos diskette Support
                CONFIG_CMD_FLASH          flinfo, erase, protect
                CONFIG_CMD_FPGA           FPGA device initialization support
+               CONFIG_CMD_FUSE           Device fuse support
                CONFIG_CMD_GETTIME      * Get time since boot
                CONFIG_CMD_GO           * the 'go' command (exec code)
                CONFIG_CMD_GREPENV      * search environment
@@ -3346,6 +3346,10 @@ Configuration Settings:
        offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
        directly. You should not need to touch this setting.
 
+- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
+       This is set by OMAP boards for the max time that reset should
+       be asserted. See doc/README.omap-reset-time for details on how
+       the value can be calulated on a given board.
 
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
@@ -5064,7 +5068,7 @@ On some platforms, it's possible to boot Linux zImage. This is done
 using the "bootz" command. The syntax of "bootz" command is the same
 as the syntax of "bootm" command.
 
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
 kernel with raw initrd images. The syntax is slightly different, the
 address of the initrd must be augmented by it's size, in the following
 format: "<initrd addres>:<initrd size>".