CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_USB * USB support
CONFIG_CMD_VFD * VFD support (TRAB)
- CONFIG_CMD_BSP * Board SPecific functions
CONFIG_CMD_CDP * Cisco Discover Protocol support
CONFIG_CMD_FSL * Microblaze FSL support
CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx
CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC
+ CONFIG_RTC_MC13783 - use MC13783 RTC
CONFIG_RTC_MC146818 - use MC146818 RTC
CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC
CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC
Currently supported on some MPC8xxx processors. For an
example, see include/configs/mpc8349emds.h.
+ CONFIG_MXC_SPI
+
+ Enables the driver for the SPI controllers on i.MX and MXC
+ SoCs. Currently only i.MX31 is supported.
+
- FPGA Support: CONFIG_FPGA
Enables FPGA subsystem.
before giving up the operation. If not defined, a
default value of 5 is used.
+ CONFIG_ARP_TIMEOUT
+
+ Timeout waiting for an ARP reply in milliseconds.
+
- Command Interpreter:
CONFIG_AUTO_COMPLETE
- CFG_BOOTMAPSZ:
Maximum size of memory mapped by the startup code of
the Linux kernel; all data that must be processed by
- the Linux kernel (bd_info, boot arguments, eventually
- initrd image) must be put below this limit.
+ the Linux kernel (bd_info, boot arguments, FDT blob if
+ used) must be put below this limit, unless "bootm_low"
+ enviroment variable is defined and non-zero. In such case
+ all data for the Linux kernel must be between "bootm_low"
+ and "bootm_low" + CFG_BOOTMAPSZ.
- CFG_MAX_FLASH_BANKS:
Max number of Flash memory banks
bootfile - Name of the image to load with TFTP
+ bootm_low - Memory range available for image processing in the bootm
+ command can be restricted. This variable is given as
+ a hexadecimal number and defines lowest address allowed
+ for use by the bootm command. See also "bootm_size"
+ environment variable. Address defined by "bootm_low" is
+ also the base of the initial memory mapping for the Linux
+ kernel -- see the descripton of CFG_BOOTMAPSZ.
+
+ bootm_size - Memory range available for image processing in the bootm
+ command can be restricted. This variable is given as
+ a hexadecimal number and defines the size of the region
+ allowed for use by the bootm command. See also "bootm_low"
+ environment variable.
+
autoload - if set to "no" (any string beginning with 'n'),
"bootp" will just load perform a lookup of the
configuration from the BOOTP server, but not try to