RedBoot for Starter-Kit V (STK5)
Ka-Ro Electronics GmbH
+ The RedBoot source code is available via git from:
+ git://git.karo-electronics.de/karo-tx-redboot.git
+ in the 'master' branch
+
===========================================================
+ v1.5.9 (2014-08-15)
+ git tag: KARO-TX53-2014-08-15
+ Changes:
+ TX53:
+ - change pad settings for DDR control lines, to prevent memory
+ errors at high temperatures
+
+ v1.5.8 (2014-08-08)
+ git tag: KARO-TX51-2014-08-08
+ Changes:
+ TX51:
+ - explicitly program the padctl settings for SDRAM and NAND from
+ the DCD to ensure correct settings after soft reset.
+ - reduce DSE values for SDRAM and NAND control lines for better
+ error margins in NAND detection and SDRAM stress test.
+ - Revert the change of the NFC clock frequency from the previous
+ release, as this is not necessary any more with the improved
+ pad settings.
+
+ v1.5.7 (2014-07-01)
+ git tag: KARO-TX53-2014-04-09
+ Changes:
+ TX51:
+ - reduce the NFC clock frequency to 16MHz to prevent NAND chip
+ detection errors at cold temperatures with the Toshiba
+ TC58NYG0S3EBAI4 flash chips
+ TX53:
+ - adjust core voltage according to selected frequency upon boot
+ - remove bogus DDR3 Write leveling calibration that is not
+ required due to the PCB layout and does not work with the
+ NT5CB128M16FP-DII chips
+
+ TX27:
+ - committed the missing source code changes for v1.5.5 that were
+ only committed to the legacy CVS repository but missing in git.
+
v1.5.6 (2013-08-19)
Changes:
TX53:
- fixed ATAG_MEM construction for banked memory
- fixed MMU mappings
- v1.5.2 (2011-12-23)
+ v1.5.2 (2011-11-28)
Changes:
TX51:
- add support for Toshiba NAND flash