select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
-config ARCH_BCM2835
- bool "Broadcom BCM2835 family"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_ERRATA_411920
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V6
- select GENERIC_CLOCKEVENTS
- select MULTI_IRQ_HANDLER
- select PINCTRL
- select PINCTRL_BCM2835
- select SPARSE_IRQ
- select USE_OF
- help
- This enables support for the Broadcom BCM2835 SoC. This SoC is
- use in the Raspberry Pi, and Roku 2 devices.
-
-config ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family"
- select ARM_GIC
- select CPU_V6K
- select GENERIC_CLOCKEVENTS
- select MIGHT_HAVE_CACHE_L2X0
- select MIGHT_HAVE_PCI
- select PCI_DOMAINS if PCI
- help
- Support for Cavium Networks CNS3XXX platform.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
-config ARCH_SIRF
- bool "CSR SiRF"
- select ARCH_REQUIRE_GPIOLIB
- select AUTO_ZRELADDR
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0
- select NO_IOPORT
- select PINCTRL
- select PINCTRL_SIRF
- select USE_OF
- help
- Support for CSR SiRFprimaII/Marco/Polo platforms
-
config ARCH_EBSA110
bool "EBSA-110"
select ARCH_USES_GETTIMEOFFSET
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_MXS
- bool "Freescale MXS-based"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK_PREPARE
- select MULTI_IRQ_HANDLER
- select PINCTRL
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Freescale MXS-based family of processors
-
config ARCH_NETX
bool "Hilscher NetX based"
select ARM_VIC
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
help
Support for ST-Ericsson U300 series mobile platforms.
-config ARCH_U8500
- bool "ST-Ericsson U8500 Series"
- depends on MMU
- select ARCH_HAS_CPUFREQ
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select SPARSE_IRQ
- help
- Support for ST-Ericsson's Ux500 architecture
-
-config ARCH_NOMADIK
- bool "STMicroelectronics Nomadik"
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_VIC
- select CLKSRC_NOMADIK_MTU
- select COMMON_CLK
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
- select PINCTRL
- select PINCTRL_STN8815
- select SPARSE_IRQ
- help
- Support for the Nomadik platform by ST-Ericsson
-
-config PLAT_SPEAR
- bool "ST SPEAr"
- select ARCH_HAS_CPUFREQ
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
-
config ARCH_DAVINCI
bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
source "arch/arm/mach-bcm/Kconfig"
+source "arch/arm/mach-bcm2835/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
-source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/mach-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
config HAVE_ARM_TWD
bool
depends on SMP
+ select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 355 if ARCH_U8500
- default 264 if MACH_H4700
default 512 if SOC_OMAP5
+ default 355 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
- depends on ARM && OF
+ depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
+ depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
projects / karo-tx-linux.git / blobdiff