ARM: imx23-olinuxino.dts: Add AUART0 support

[karo-tx-linux.git] / arch / arm / boot / dts / imx23.dtsi

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae69da5d6771c75d9605ca3bbbcbcaa..9700872794d04f7bbfbf6930ecacf239979947ef 100644 (file)
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
 
                        dma-apbh@80004000 {
                                compatible = "fsl,imx23-dma-apbh";
-                               reg = <0x80004000 2000>;
+                               reg = <0x80004000 0x2000>;
                        };
 
                        ecc@80008000 {
-                               reg = <0x80008000 2000>;
+                               reg = <0x80008000 0x2000>;
                                status = "disabled";
                        };
 
@@ -63,7 +63,7 @@
                                compatible = "fsl,imx23-gpmi-nand";
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               reg = <0x8000c000 2000>, <0x8000a000 2000>;
+                               reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
                                reg-names = "gpmi-nand", "bch";
                                interrupts = <13>, <56>;
                                interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
                        };
 
                        ssp0: ssp@80010000 {
-                               reg = <0x80010000 2000>;
+                               reg = <0x80010000 0x2000>;
                                interrupts = <15 14>;
                                fsl,ssp-dma-channel = <1>;
                                status = "disabled";
                        };
 
                        etm@80014000 {
-                               reg = <0x80014000 2000>;
+                               reg = <0x80014000 0x2000>;
                                status = "disabled";
                        };
 
@@ -87,7 +87,7 @@
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx23-pinctrl", "simple-bus";
-                               reg = <0x80018000 2000>;
+                               reg = <0x80018000 0x2000>;
 
                                gpio0: gpio@0 {
                                        compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -140,6 +140,17 @@
                                        fsl,pull-up = <0>;
                                };
 
+                               auart0_2pins_a: auart0-2pins@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
+                                               0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+                                       >;
+                                       fsl,drive-strength = <0>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <0>;
+                               };
+
                                gpmi_pins_a: gpmi-nand@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -273,32 +284,32 @@
                        };
 
                        emi@80020000 {
-                               reg = <0x80020000 2000>;
+                               reg = <0x80020000 0x2000>;
                                status = "disabled";
                        };
 
                        dma-apbx@80024000 {
                                compatible = "fsl,imx23-dma-apbx";
-                               reg = <0x80024000 2000>;
+                               reg = <0x80024000 0x2000>;
                        };
 
                        dcp@80028000 {
-                               reg = <0x80028000 2000>;
+                               reg = <0x80028000 0x2000>;
                                status = "disabled";
                        };
 
                        pxp@8002a000 {
-                               reg = <0x8002a000 2000>;
+                               reg = <0x8002a000 0x2000>;
                                status = "disabled";
                        };
 
                        ocotp@8002c000 {
-                               reg = <0x8002c000 2000>;
+                               reg = <0x8002c000 0x2000>;
                                status = "disabled";
                        };
 
                        axi-ahb@8002e000 {
-                               reg = <0x8002e000 2000>;
+                               reg = <0x8002e000 0x2000>;
                                status = "disabled";
                        };
 
@@ -310,14 +321,14 @@
                        };
 
                        ssp1: ssp@80034000 {
-                               reg = <0x80034000 2000>;
+                               reg = <0x80034000 0x2000>;
                                interrupts = <2 20>;
                                fsl,ssp-dma-channel = <2>;
                                status = "disabled";
                        };
 
                        tvenc@80038000 {
-                               reg = <0x80038000 2000>;
+                               reg = <0x80038000 0x2000>;
                                status = "disabled";
                        };
                 };
@@ -330,37 +341,37 @@
                        ranges;
 
                        clkctl@80040000 {
-                               reg = <0x80040000 2000>;
+                               reg = <0x80040000 0x2000>;
                                status = "disabled";
                        };
 
                        saif0: saif@80042000 {
-                               reg = <0x80042000 2000>;
+                               reg = <0x80042000 0x2000>;
                                status = "disabled";
                        };
 
                        power@80044000 {
-                               reg = <0x80044000 2000>;
+                               reg = <0x80044000 0x2000>;
                                status = "disabled";
                        };
 
                        saif1: saif@80046000 {
-                               reg = <0x80046000 2000>;
+                               reg = <0x80046000 0x2000>;
                                status = "disabled";
                        };
 
                        audio-out@80048000 {
-                               reg = <0x80048000 2000>;
+                               reg = <0x80048000 0x2000>;
                                status = "disabled";
                        };
 
                        audio-in@8004c000 {
-                               reg = <0x8004c000 2000>;
+                               reg = <0x8004c000 0x2000>;
                                status = "disabled";
                        };
 
                        lradc@80050000 {
-                               reg = <0x80050000 2000>;
+                               reg = <0x80050000 0x2000>;
                                status = "disabled";
                        };
 
@@ -370,26 +381,26 @@
                        };
 
                        i2c@80058000 {
-                               reg = <0x80058000 2000>;
+                               reg = <0x80058000 0x2000>;
                                status = "disabled";
                        };
 
                        rtc@8005c000 {
                                compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-                               reg = <0x8005c000 2000>;
+                               reg = <0x8005c000 0x2000>;
                                interrupts = <22>;
                        };
 
                        pwm: pwm@80064000 {
                                compatible = "fsl,imx23-pwm";
-                               reg = <0x80064000 2000>;
+                               reg = <0x80064000 0x2000>;
                                #pwm-cells = <2>;
                                fsl,pwm-number = <5>;
                                status = "disabled";
                        };
 
                        timrot@80068000 {
-                               reg = <0x80068000 2000>;
+                               reg = <0x80068000 0x2000>;
                                status = "disabled";
                        };
 
@@ -429,7 +440,7 @@
                ranges;
 
                usbctrl@80080000 {
-                       reg = <0x80080000 0x10000>;
+                       reg = <0x80080000 0x40000>;
                        status = "disabled";
                };
        };