ARM: dts: imx6sl-evk: enable the SPI NOR

[karo-tx-linux.git] / arch / arm / boot / dts / imx6sl-evk.dts

diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 2886a590823dc440a9f0ba8a5d72c8efe31916d4..cc68e19c51631666e8241fbc1d4965a18605ca28 100644 (file)
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -17,6 +17,44 @@
        memory {
                reg = <0x80000000 0x40000000>;
        };
+
+       regulators {
+               compatible = "simple-bus";
+
+               reg_usb_otg1_vbus: usb_otg1_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_otg1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio4 0 0>;
+                       enable-active-high;
+               };
+
+               reg_usb_otg2_vbus: usb_otg2_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_otg2_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio4 2 0>;
+                       enable-active-high;
+               };
+       };
+};
+
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio4 11 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1_1>;
+       status = "okay";
+
+       flash: m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "st,m25p32";
+               spi-max-frequency = <20000000>;
+               reg = <0>;
+       };
 };
 
 &fec {
@@ -38,6 +76,8 @@
                                MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
                                MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
                                MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+                               MX6SL_PAD_KEY_COL4__GPIO4_IO00  0x80000000
+                               MX6SL_PAD_KEY_COL5__GPIO4_IO02  0x80000000
                        >;
                };
        };
@@ -49,9 +89,26 @@
        status = "okay";
 };
 
-&usdhc1 {
+&usbotg1 {
+       vbus-supply = <&reg_usb_otg1_vbus>;
        pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg1_1>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg2 {
+       vbus-supply = <&reg_usb_otg2_vbus>;
+       dr_mode = "host";
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc1 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc1_1>;
+       pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
        bus-width = <8>;
        cd-gpios = <&gpio4 7 0>;
        wp-gpios = <&gpio4 6 0>;
@@ -59,16 +116,20 @@
 };
 
 &usdhc2 {
-       pinctrl-names = "default";
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc2_1>;
+       pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
        cd-gpios = <&gpio5 0 0>;
        wp-gpios = <&gpio4 29 0>;
        status = "okay";
 };
 
 &usdhc3 {
-       pinctrl-names = "default";
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc3_1>;
+       pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
        cd-gpios = <&gpio3 22 0>;
        status = "okay";
 };