memory {
reg = <0x80000000 0x40000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb_otg1_vbus: usb_otg1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 0>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: usb_otg2_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 0>;
+ enable-active-high;
+ };
+ };
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 11 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
};
&fec {
MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
>;
};
};
status = "okay";
};
-&usdhc1 {
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1_1>;
+ pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio4 7 0>;
wp-gpios = <&gpio4 6 0>;
};
&usdhc2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_1>;
+ pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
cd-gpios = <&gpio5 0 0>;
wp-gpios = <&gpio4 29 0>;
status = "okay";
};
&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
cd-gpios = <&gpio3 22 0>;
status = "okay";
};