#include "skeleton.dtsi"
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "nxp,lpc3220";
interrupt-parent = <&mic>;
};
};
+ clocks {
+ xtal_32k: xtal_32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32k";
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13000000>;
+ clock-output-names = "xtal";
+ };
+ };
+
ahb {
#address-cells = <1>;
#size-cells = <1>;
slc: flash@20020000 {
compatible = "nxp,lpc3220-slc";
reg = <0x20020000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SLC>;
status = "disabled";
};
mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc";
reg = <0x200a8000 0x11000>;
- interrupts = <11 0>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MLC>;
status = "disabled";
};
dma: dma@31000000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0x31000000 0x1000>;
- interrupts = <0x1c 0>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_DMA>;
+ clock-names = "apb_pclk";
};
usb {
ohci: ohci@0 {
compatible = "nxp,ohci-nxp", "usb-ohci";
reg = <0x0 0x300>;
- interrupts = <0x3b 0>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
status = "disabled";
};
usbd: usbd@0 {
compatible = "nxp,lpc3220-udc";
reg = <0x0 0x300>;
- interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>,
+ <62 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <58 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
status = "disabled";
};
i2cusb: i2c@300 {
compatible = "nxp,pnx-i2c";
reg = <0x300 0x100>;
- interrupts = <0x3f 0>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
};
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
};
clcd: clcd@31040000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x31040000 0x1000>;
- interrupts = <0x0e 0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_LCD>;
+ clock-names = "apb_pclk";
status = "disabled";
};
mac: ethernet@31060000 {
compatible = "nxp,lpc-eth";
reg = <0x31060000 0x1000>;
- interrupts = <0x1d 0>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MAC>;
};
emc: memory-controller@31080000 {
compatible = "arm,pl175", "arm,primecell";
reg = <0x31080000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+ clock-names = "mpmcclk", "apb_pclk";
#address-cells = <1>;
#size-cells = <1>;
ssp0: ssp@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
- interrupts = <0x14 0>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP0>;
+ clock-names = "apb_pclk";
};
spi1: spi@20088000 {
ssp1: ssp@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
- interrupts = <0x15 0>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP1>;
+ clock-names = "apb_pclk";
};
spi2: spi@20090000 {
sd: sd@20098000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x20098000 0x1000>;
- interrupts = <0x0f 0>, <0x0d 0>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SD>;
+ clock-names = "apb_pclk";
status = "disabled";
};
/* actually, ns16550a w/ 64 byte fifos! */
compatible = "nxp,lpc3220-uart";
reg = <0x40090000 0x1000>;
- interrupts = <9 0>;
- clock-frequency = <13000000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART5>;
status = "disabled";
};
uart3: serial@40080000 {
compatible = "nxp,lpc3220-uart";
reg = <0x40080000 0x1000>;
- interrupts = <7 0>;
- clock-frequency = <13000000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART3>;
status = "disabled";
};
uart4: serial@40088000 {
compatible = "nxp,lpc3220-uart";
reg = <0x40088000 0x1000>;
- interrupts = <8 0>;
- clock-frequency = <13000000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART4>;
status = "disabled";
};
uart6: serial@40098000 {
compatible = "nxp,lpc3220-uart";
reg = <0x40098000 0x1000>;
- interrupts = <10 0>;
- clock-frequency = <13000000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART6>;
status = "disabled";
};
i2c1: i2c@400A0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
- interrupts = <0x33 0>;
+ interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
+ clocks = <&clk LPC32XX_CLK_I2C1>;
};
i2c2: i2c@400A8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
- interrupts = <0x32 0>;
+ interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
pnx,timeout = <0x64>;
+ clocks = <&clk LPC32XX_CLK_I2C2>;
};
mpwm: mpwm@400E8000 {
compatible = "simple-bus";
ranges = <0x20000000 0x20000000 0x30000000>;
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x040004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
+
/*
* MIC Interrupt controller includes:
* MIC @40008000
uart1: serial@40014000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x40014000 0x1000>;
- interrupts = <26 0>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@40018000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x40018000 0x1000>;
- interrupts = <25 0>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart7: serial@4001c000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x4001c000 0x1000>;
- interrupts = <24 0>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
rtc: rtc@40024000 {
compatible = "nxp,lpc3220-rtc";
reg = <0x40024000 0x1000>;
- interrupts = <0x34 0>;
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_RTC>;
};
gpio: gpio@40028000 {
timer4: timer@4002C000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
- interrupts = <0x3 0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER4>;
+ clock-names = "timerclk";
status = "disabled";
};
timer5: timer@40030000 {
compatible = "nxp,lpc3220-timer";
reg = <0x40030000 0x1000>;
- interrupts = <0x4 0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER5>;
+ clock-names = "timerclk";
status = "disabled";
};
watchdog: watchdog@4003C000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_WDOG>;
};
timer0: timer@40044000 {
compatible = "nxp,lpc3220-timer";
reg = <0x40044000 0x1000>;
- interrupts = <0x10 0>;
+ clocks = <&clk LPC32XX_CLK_TIMER0>;
+ clock-names = "timerclk";
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
};
/*
adc: adc@40048000 {
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
- interrupts = <0x27 0>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
status = "disabled";
};
tsc: tsc@40048000 {
compatible = "nxp,lpc3220-tsc";
reg = <0x40048000 0x1000>;
- interrupts = <0x27 0>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
status = "disabled";
};
timer1: timer@4004C000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
- interrupts = <0x11 0>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER1>;
+ clock-names = "timerclk";
};
key: key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
- interrupts = <54 0>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
timer2: timer@40058000 {
compatible = "nxp,lpc3220-timer";
reg = <0x40058000 0x1000>;
- interrupts = <0x12 0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER2>;
+ clock-names = "timerclk";
status = "disabled";
};
pwm1: pwm@4005C000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM1>;
status = "disabled";
};
pwm2: pwm@4005C004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM2>;
status = "disabled";
};
timer3: timer@40060000 {
compatible = "nxp,lpc3220-timer";
reg = <0x40060000 0x1000>;
- interrupts = <0x13 0>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER3>;
+ clock-names = "timerclk";
status = "disabled";
};
};
projects / karo-tx-linux.git / blobdiff