* Based on code from LTIB:
* (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
/* Maximum fixed count */
-#define TIMER_LOAD_VAL 0xffffffff
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
DECLARE_GLOBAL_DATA_PTR;
#define timestamp (gd->arch.tbl)
-#define lastdec (gd->lastinc)
+#define lastdec (gd->arch.lastinc)
/*
* This driver uses 1kHz clock source.
*/
-#define MX28_INCREMENTER_HZ 1000
+#define MXS_INCREMENTER_HZ 1000
static inline unsigned long tick_to_time(unsigned long tick)
{
- return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+ return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
}
static inline unsigned long time_to_tick(unsigned long time)
{
- return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+ return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
}
/* Calculate how many ticks happen in "us" microseconds */
static inline unsigned long us_to_tick(unsigned long us)
{
- return (us * MX28_INCREMENTER_HZ) / 1000000;
+ return (us * MXS_INCREMENTER_HZ) / 1000000;
}
int timer_init(void)
mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+ writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
/* Set UPDATE bit and 1Khz frequency */
writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
&timrot_regs->hw_timrot_timctrl0);
/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+ writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
return 0;
}
{
struct mxs_timrot_regs *timrot_regs =
(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+ uint32_t now;
/* Current tick value */
- uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+#if defined(CONFIG_MX23)
+ /* Upper bits are the valid ones. */
+ now = readl(&timrot_regs->hw_timrot_timcount0) >>
+ TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+ now = readl(&timrot_regs->hw_timrot_running_count0);
+#else
+#error "Don't know how to read timrot_regs"
+#endif
if (lastdec >= now) {
/*
}
/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
-#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
+#define MXS_HW_DIGCTL_MICROSECONDS 0x8001c0c0
void __udelay(unsigned long usec)
{
uint32_t old, new, incr;
uint32_t counter = 0;
- old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+ old = readl(MXS_HW_DIGCTL_MICROSECONDS);
while (counter < usec) {
- new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+ new = readl(MXS_HW_DIGCTL_MICROSECONDS);
/* Check if the timer wrapped. */
if (new < old) {
ulong get_tbclk(void)
{
- return MX28_INCREMENTER_HZ;
+ return MXS_INCREMENTER_HZ;
}