*/
#include <common.h>
+#include <ahci.h>
#include <spl.h>
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
+#include <scsi.h>
DECLARE_GLOBAL_DATA_PTR;
* used. But it not correct to assume that romcode structure
* encoding would be same as u-boot. So use the defined offsets.
*/
- gd->arch.omap_boot_params.omap_bootdevice = boot_device =
- *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+ boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+
+#if defined(BOOT_DEVICE_NAND_I2C)
+ /*
+ * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
+ * Otherwise the SPL boot IF can't handle this device correctly.
+ * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
+ * Draco leads to this boot-device passed to SPL from the BootROM.
+ */
+ if (boot_device == BOOT_DEVICE_NAND_I2C)
+ boot_device = BOOT_DEVICE_NAND;
+#endif
+ gd->arch.omap_boot_params.omap_bootdevice = boot_device;
gd->arch.omap_boot_params.ch_flags =
*((u8 *)(rom_params + CH_FLAGS_OFFSET));
}
}
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
- return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
+ return gd->arch.omap_boot_params.omap_bootdevice;
}
u32 spl_boot_mode(void)
if (val == MMCSD_MODE_RAW)
return MMCSD_MODE_RAW;
- else if (val == MMCSD_MODE_FAT)
- return MMCSD_MODE_FAT;
+ else if (val == MMCSD_MODE_FS)
+ return MMCSD_MODE_FS;
else
#ifdef CONFIG_SUPPORT_EMMC_BOOT
return MMCSD_MODE_EMMCBOOT;
void spl_board_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+ save_omap_boot_params();
+
+ /* Prepare console output */
+ preloader_console_init();
+
#ifdef CONFIG_SPL_NAND_SUPPORT
gpmc_init();
#endif
image_entry((u32 *)&gd->arch.omap_boot_params);
}
#endif
+
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void arch_preboot_os(void)
+{
+ ahci_reset((void __iomem *)DWC_AHSATA_BASE);
+}
+#endif
+
+#if defined(CONFIG_USB_FUNCTION_FASTBOOT) && !defined(CONFIG_ENV_IS_NOWHERE)
+int fb_set_reboot_flag(void)
+{
+ printf("Setting reboot to fastboot flag ...\n");
+ setenv("dofastboot", "1");
+ saveenv();
+ return 0;
+}
+#endif