#include <linux/compiler.h>
-#ifdef CONFIG_SPL_BUILD
-/* Pointer to the global data structure for SPL */
-DECLARE_GLOBAL_DATA_PTR;
-
-/* The sunxi internal brom will try to loader external bootloader
- * from mmc0, nand flash, mmc2.
- * Unfortunately we can't check how SPL was loaded so assume
- * it's always the first SD/MMC controller
- */
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_MMC1;
-}
-
-/* No confirmation data available in SPL yet. Hardcode bootmode */
-u32 spl_boot_mode(void)
-{
- return MMCSD_MODE_RAW;
-}
-#endif
-
-int gpio_init(void)
+struct fel_stash {
+ uint32_t sp;
+ uint32_t lr;
+ uint32_t cpsr;
+ uint32_t sctlr;
+ uint32_t vbar;
+ uint32_t cr;
+};
+
+struct fel_stash fel_stash __attribute__((section(".data")));
+
+static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
#endif
- sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
+#if defined(CONFIG_MACH_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0_RX);
+#else
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0_RX);
+#endif
sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
- sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I)
- sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0);
sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
- sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
- sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL_R_UART);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL_R_UART);
sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
#else
#error Unsupported console port number. Please fix pin mux settings in board.c
return 0;
}
-void reset_cpu(ulong addr)
+void spl_board_load_image(void)
{
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- static const struct sunxi_wdog *wdog =
- &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-
- while (1) {
- /* sun5i sometimes gets stuck without this */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- }
-#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */
- static const struct sunxi_wdog *wdog =
- ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_CFG_RESET, &wdog->cfg);
- writel(WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-#endif
+ debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr);
+ return_to_fel(fel_stash.sp, fel_stash.lr);
}
-/* do some early init */
void s_init(void)
{
-#if defined CONFIG_SPL_BUILD && defined CONFIG_MACH_SUN6I
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
/* Magic (undocmented) value taken from boot0, without this DRAM
* access gets messed up (seems cache related) */
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
#endif
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \
- defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
+#if defined CONFIG_MACH_SUN6I || \
+ defined CONFIG_MACH_SUN7I || \
+ defined CONFIG_MACH_SUN8I
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
timer_init();
gpio_init();
i2c_init_board();
+}
#ifdef CONFIG_SPL_BUILD
- gd = &gdata;
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SPL_FEL
+ /*
+ * This is the legacy compile time configuration for a special FEL
+ * enabled build. It has many restrictions and can only boot over USB.
+ */
+ return BOOT_DEVICE_BOARD;
+#else
+ /*
+ * When booting from the SD card, the "eGON.BT0" signature is expected
+ * to be found in memory at the address 0x0004 (see the "mksunxiboot"
+ * tool, which generates this header).
+ *
+ * When booting in the FEL mode over USB, this signature is patched in
+ * memory and replaced with something else by the 'fel' tool. This other
+ * signature is selected in such a way, that it can't be present in a
+ * valid bootable SD card image (because the BROM would refuse to
+ * execute the SPL in this case).
+ *
+ * This branch is just making a decision at runtime whether to load
+ * the main u-boot binary from the SD card (if the "eGON.BT0" signature
+ * is found) or return to the FEL code in the BROM to wait and receive
+ * the main u-boot binary over USB.
+ */
+ if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */
+ return BOOT_DEVICE_MMC1;
+ else
+ return BOOT_DEVICE_BOARD;
+#endif
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+
+void board_init_f(ulong dummy)
+{
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
sunxi_board_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ board_init_r(NULL, 0);
+}
+#endif
+
+void reset_cpu(ulong addr)
+{
+#ifdef CONFIG_SUNXI_GEN_SUN4I
+ static const struct sunxi_wdog *wdog =
+ &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+
+ while (1) {
+ /* sun5i sometimes gets stuck without this */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ }
+#endif
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+ static const struct sunxi_wdog *wdog =
+ ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_CFG_RESET, &wdog->cfg);
+ writel(WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
#endif
}
projects / karo-tx-uboot.git / blobdiff