* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
* (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _IMX_REGS_H
#define _IMX_REGS_H
+#include <asm/arch/regs-rtc.h>
+
#ifndef __ASSEMBLY__
extern void imx_gpio_mode (int gpio_mode);
#ifdef CONFIG_FEC_MXC
extern void mx27_fec_init_pins(void);
-extern void imx_get_mac_from_fuse(unsigned char *mac);
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
u32 gpt_tstat;
};
-/*
- * GPIO Module and I/O Multiplexer
- */
-#define PORTA 0
-#define PORTB 1
-#define PORTC 2
-#define PORTD 3
-#define PORTE 4
-#define PORTF 5
-
-struct gpio_regs {
- struct {
- u32 ddir;
- u32 ocr1;
- u32 ocr2;
- u32 iconfa1;
- u32 iconfa2;
- u32 iconfb1;
- u32 iconfb2;
- u32 dr;
- u32 gius;
- u32 ssr;
- u32 icr1;
- u32 icr2;
- u32 imr;
- u32 isr;
- u32 gpr;
- u32 swr;
- u32 puen;
- u32 res[0x2f];
- } port[6];
-};
-
/* IIM Control Registers */
struct iim_regs {
u32 iim_stat;
u32 iim_sdat;
u32 iim_prev;
u32 iim_srev;
- u32 iim_prog_p;
+ u32 iim_prg_p;
u32 iim_scs0;
u32 iim_scs1;
u32 iim_scs2;
struct fuse_bank {
u32 fuse_regs[0x20];
u32 fuse_rsvd[0xe0];
- } bank[1];
+ } bank[2];
};
struct fuse_bank0_regs {
#endif
+#define ARCH_MXC
+
#define IMX_IO_BASE 0x10000000
#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
#define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE)
#define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE)
#define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE)
-#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE)
-#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE)
-#define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE)
+#define IMX_RTC_BASE (0x07000 + IMX_IO_BASE)
+#define UART1_BASE (0x0a000 + IMX_IO_BASE)
+#define UART2_BASE (0x0b000 + IMX_IO_BASE)
+#define UART3_BASE (0x0c000 + IMX_IO_BASE)
+#define UART4_BASE (0x0d000 + IMX_IO_BASE)
+#define I2C1_BASE_ADDR (0x12000 + IMX_IO_BASE)
#define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE)
#define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE)
#define IMX_TIM5_BASE (0x1a000 + IMX_IO_BASE)
#define IMX_UART5_BASE (0x1b000 + IMX_IO_BASE)
#define IMX_UART6_BASE (0x1c000 + IMX_IO_BASE)
-#define IMX_I2C2_BASE (0x1D000 + IMX_IO_BASE)
+#define I2C2_BASE_ADDR (0x1D000 + IMX_IO_BASE)
#define IMX_TIM6_BASE (0x1f000 + IMX_IO_BASE)
#define IMX_AIPI2_BASE (0x20000 + IMX_IO_BASE)
#define IMX_PLL_BASE (0x27000 + IMX_IO_BASE)
#define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE)
#define IMX_IIM_BASE (0x28000 + IMX_IO_BASE)
+#define IIM_BASE_ADDR IMX_IIM_BASE
#define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE)
+#define IMX_NFC_BASE (0xD8000000)
#define IMX_ESD_BASE (0xD8001000)
#define IMX_WEIM_BASE (0xD8002000)
+#define NFC_BASE_ADDR IMX_NFC_BASE
+
+
/* FMCR System Control bit definition*/
#define UART4_RXD_CTL (1 << 25)
#define UART4_RTS_CTL (1 << 24)
#define TSTAT_CAPT (1 << 1) /* Capture event */
#define TSTAT_COMP 1 /* Compare event */
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (PORTA << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (PORTB << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (PORTC << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (PORTD << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (PORTE << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (PORTF << GPIO_PORT_SHIFT)
+#define GPIO1_BASE_ADDR 0x10015000
+#define GPIO2_BASE_ADDR 0x10015100
+#define GPIO3_BASE_ADDR 0x10015200
+#define GPIO4_BASE_ADDR 0x10015300
+#define GPIO5_BASE_ADDR 0x10015400
+#define GPIO6_BASE_ADDR 0x10015500
#define GPIO_OUT (1 << 8)
#define GPIO_IN (0 << 8)