u32 pdr2;
};
-/* GPIO Registers */
-struct gpio_regs {
- u32 gpio_dr;
- u32 gpio_dir;
- u32 gpio_psr;
-};
-
struct cspi_regs {
u32 rxdata;
u32 txdata;
/* Watchdog Timer (WDOG) registers */
#define WDOG_ENABLE (1 << 2)
#define WDOG_WT_SHIFT 8
+#define WDOG_WDZST (1 << 0)
+
struct wdog_regs {
u16 wcr; /* Control */
u16 wsr; /* Service */
struct mx3_cpu_type {
u8 srev;
- char *v;
+ u32 v;
};
#define IOMUX_PADNUM_MASK 0x1ff
MX31_PIN_CAPTURE = IOMUX_PIN(7, 327),
};
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+ MUX_PGP_FIRI = 1 << 0,
+ MUX_DDR_MODE = 1 << 1,
+ MUX_PGP_CSPI_BB = 1 << 2,
+ MUX_PGP_ATA_1 = 1 << 3,
+ MUX_PGP_ATA_2 = 1 << 4,
+ MUX_PGP_ATA_3 = 1 << 5,
+ MUX_PGP_ATA_4 = 1 << 6,
+ MUX_PGP_ATA_5 = 1 << 7,
+ MUX_PGP_ATA_6 = 1 << 8,
+ MUX_PGP_ATA_7 = 1 << 9,
+ MUX_PGP_ATA_8 = 1 << 10,
+ MUX_PGP_UH2 = 1 << 11,
+ MUX_SDCTL_CSD0_SEL = 1 << 12,
+ MUX_SDCTL_CSD1_SEL = 1 << 13,
+ MUX_CSPI1_UART3 = 1 << 14,
+ MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
+ MUX_TAMPER_DETECT_EN = 1 << 16,
+ MUX_PGP_USB_4WIRE = 1 << 17,
+ MUX_PGP_USB_COMMON = 1 << 18,
+ MUX_SDHC_MEMSTICK1 = 1 << 19,
+ MUX_SDHC_MEMSTICK2 = 1 << 20,
+ MUX_PGP_SPLL_BYP = 1 << 21,
+ MUX_PGP_UPLL_BYP = 1 << 22,
+ MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
+ MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
+ MUX_CSPI3_UART5_SEL = 1 << 25,
+ MUX_PGP_ATA_9 = 1 << 26,
+ MUX_PGP_USB_SUSPEND = 1 << 27,
+ MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
+ MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
+ MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
+ MUX_CLKO_DDR_MODE = 1 << 31,
+};
+
/* Bit definitions for RCSR register in CCM */
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
+/* WEIM CS control registers */
+struct mx31_weim_cscr {
+ u32 upper;
+ u32 lower;
+ u32 additional;
+ u32 reserved;
+};
+
+struct mx31_weim {
+ struct mx31_weim_cscr cscr[6];
+};
+
#endif
#define __REG(x) (*((volatile u32 *)(x)))
#define PLL_MFI(x) (((x) & 0xf) << 10)
#define PLL_MFN(x) (((x) & 0x3ff) << 0)
+#define GET_PDR0_CSI_PODF(x) (((x) >> 23) & 0x1ff)
+#define GET_PDR0_PER_PODF(x) (((x) >> 16) & 0x1f)
+#define GET_PDR0_HSP_PODF(x) (((x) >> 11) & 0x7)
+#define GET_PDR0_NFC_PODF(x) (((x) >> 8) & 0x7)
+#define GET_PDR0_IPG_PODF(x) (((x) >> 6) & 0x3)
+#define GET_PDR0_MAX_PODF(x) (((x) >> 3) & 0x7)
+#define GET_PDR0_MCU_PODF(x) ((x) & 0x7)
+
+#define GET_PLL_PD(x) (((x) >> 26) & 0xf)
+#define GET_PLL_MFD(x) (((x) >> 16) & 0x3ff)
+#define GET_PLL_MFI(x) (((x) >> 10) & 0xf)
+#define GET_PLL_MFN(x) (((x) >> 0) & 0x3ff)
+
+
#define WEIM_ESDCTL0 0xB8001000
#define WEIM_ESDCFG0 0xB8001004
#define WEIM_ESDCTL1 0xB8001008
#define ESDCTL_BL(x) ((x) << 7)
#define ESDCTL_PRCT(x) ((x) << 0)
+/* 13 fields of the upper CS control register */
+#define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
+ cnc, wsc, ew, wws, edc) \
+ ((sp) << 31 | (wp) << 30 | (bcd) << 28 | (psz) << 22 | (pme) << 21 |\
+ (sync) << 20 | (dol) << 16 | (cnc) << 14 | (wsc) << 8 | (ew) << 7 |\
+ (wws) << 4 | (edc) << 0)
+/* 12 fields of the lower CS control register */
+#define CSCR_L(oea, oen, ebwa, ebwn, \
+ csa, ebc, dsz, csn, psr, cre, wrap, csen) \
+ ((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
+ (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
+ (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
+/* 14 fields of the additional CS control register */
+#define CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
+ wwu, age, cnc2, fce) \
+ ((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
+ (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
+ (dww) << 6 | (dct) << 4 | (wwu) << 3 |\
+ (age) << 2 | (cnc2) << 1 | (fce) << 0)
+
#define WEIM_BASE 0xb8002000
-#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
-#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
-#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
#define IOMUXC_BASE 0x43FAC000
#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
#define IRAM_SIZE (16 * 1024)
#define MX31_AIPS1_BASE_ADDR 0x43f00000
-#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000)
/* USB portsc */
/* values for portsc field */