i2c: Convert most new-style drivers to use module aliasing

[karo-tx-linux.git] / arch / arm / mach-at91 / board-csb337.c

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 0e2a11fc5bbd587315b0a6f0a78d8ee3ef31dc25..81f1ebb4e964ed3c3228bb4c1b2a370b982ca39b 100644 (file)
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -43,17 +43,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb337_uart_config = {
-       .console_tty    = 0,                            /* ttyS0 */
-       .nr_tty         = 2,
-       .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
-};
-
 static void __init csb337_map_io(void)
 {
        /* Initialize processor: 3.6864 MHz crystal */
@@ -62,8 +51,11 @@ static void __init csb337_map_io(void)
        /* Setup the LEDs */
        at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 
-       /* Setup the serial ports and console */
-       at91_init_serial(&csb337_uart_config);
+       /* DBGU on ttyS0 */
+       at91_register_uart(0, 0, 0);
+
+       /* make console=ttyS0 the default */
+       at91_set_serial_console(0);
 }
 
 static void __init csb337_init_irq(void)
@@ -87,8 +79,7 @@ static struct at91_udc_data __initdata csb337_udc_data = {
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
        {
-               I2C_BOARD_INFO("rtc-ds1307", 0x68),
-               .type   = "ds1307",
+               I2C_BOARD_INFO("ds1307", 0x68),
        },
 };