Merge branch 'uhid' into for-linus

[karo-tx-linux.git] / arch / arm / mach-at91 / board-yl-9200.c

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 38dd279d30b25657004177bfa488b4906d4c525d..d56665ea4b55d3a8259228d8801fe20a547b9bab 100644 (file)
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,26 +58,6 @@ static void __init yl9200_init_early(void)
 
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-       at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
-       /* DBGU on ttyS0. (Rx & Tx only) */
-       at91_register_uart(0, 0, 0);
-
-       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                       | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-                       | ATMEL_UART_RI);
-
-       /* USART0 on ttyS2. (Rx & Tx only to JP3) */
-       at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
-       /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
-       at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
-       /* set serial console to ttyS0 (ie, DBGU) */
-       at91_set_serial_console(0);
 }
 
 /*
@@ -560,7 +540,23 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
+       /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+       at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
        /* Serial */
+       /* DBGU on ttyS0. (Rx & Tx only) */
+       at91_register_uart(0, 0, 0);
+
+       /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+       at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                       | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+                       | ATMEL_UART_RI);
+
+       /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+       at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+       /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+       at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
        at91_add_device_serial();
        /* Ethernet */
        at91_add_device_eth(&yl9200_eth_data);