config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
+ select GIC_NON_BANKED
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Enable EXYNOS5440 SoC support
-config EXYNOS_ATAGS
- bool "ATAGS based boot for EXYNOS (deprecated)"
- depends on !ARCH_MULTIPLATFORM
- depends on ATAGS
- default y
- help
- The EXYNOS platform is moving towards being completely probed
- through device tree. This enables support for board files using
- the traditional ATAGS boot format.
- Note that this option is not available for multiplatform builds.
-
-if EXYNOS_ATAGS
-
-config EXYNOS_DEV_DMA
- bool
- help
- Compile in amba device definitions for DMA controller
-
-config EXYNOS4_DEV_AHCI
- bool
- help
- Compile in platform device definitions for AHCI
-
-config EXYNOS4_SETUP_FIMD0
- bool
- help
- Common setup code for FIMD0.
-
-config EXYNOS4_DEV_USB_OHCI
- bool
- help
- Compile in platform device definition for USB OHCI
-
-config EXYNOS4_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config EXYNOS4_SETUP_I2C2
- bool
- help
- Common setup code for i2c bus 2.
-
-config EXYNOS4_SETUP_I2C3
- bool
- help
- Common setup code for i2c bus 3.
-
-config EXYNOS4_SETUP_I2C4
- bool
- help
- Common setup code for i2c bus 4.
-
-config EXYNOS4_SETUP_I2C5
- bool
- help
- Common setup code for i2c bus 5.
-
-config EXYNOS4_SETUP_I2C6
- bool
- help
- Common setup code for i2c bus 6.
-
-config EXYNOS4_SETUP_I2C7
- bool
- help
- Common setup code for i2c bus 7.
-
-config EXYNOS4_SETUP_KEYPAD
- bool
- help
- Common setup code for keypad.
-
-config EXYNOS4_SETUP_SDHCI
- bool
- select EXYNOS4_SETUP_SDHCI_GPIO
- help
- Internal helper functions for EXYNOS4 based SDHCI systems.
-
-config EXYNOS4_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config EXYNOS4_SETUP_FIMC
- bool
- help
- Common setup code for the camera interfaces.
-
-config EXYNOS4_SETUP_USB_PHY
- bool
- help
- Common setup code for USB PHY controller
-
-config EXYNOS_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-# machine support
-
-if ARCH_EXYNOS4
-
-comment "EXYNOS4210 Boards"
-
-config MACH_SMDKC210
- bool "SMDKC210"
- select MACH_SMDKV310
- help
- Machine support for Samsung SMDKC210
-
-config MACH_SMDKV310
- bool "SMDKV310"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_AHCI
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_TV
- select S5P_DEV_USB_EHCI
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- help
- Machine support for Samsung SMDKV310
-
-config MACH_ARMLEX4210
- bool "ARMLEX4210"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_AHCI
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS_DEV_DMA
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- help
- Machine support for Samsung ARMLEX4210 based on EXYNOS4210
-
-config MACH_UNIVERSAL_C210
- bool "Mobile UNIVERSAL_C210 Board"
- select CLKSRC_MMIO
- select CPU_EXYNOS4210
- select EXYNOS4_SETUP_FIMC
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S3C_DEV_USB_HSOTG
- select S5P_DEV_CSIS0
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_ONENAND
- select S5P_DEV_TV
- select S5P_GPIO_INT
- select S5P_SETUP_MIPIPHY
- select SAMSUNG_HRT
- help
- Machine support for Samsung Mobile Universal S5PC210 Reference
- Board.
-
-config MACH_NURI
- bool "Mobile NURI Board"
- select CPU_EXYNOS4210
- select EXYNOS4_SETUP_FIMC
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_I2C6
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S3C_DEV_I2C6
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_CSIS0
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_USB_EHCI
- select S5P_GPIO_INT
- select S5P_SETUP_MIPIPHY
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- help
- Machine support for Samsung Mobile NURI Board.
-
-config MACH_ORIGEN
- bool "ORIGEN"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_TV
- select S5P_DEV_USB_EHCI
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- help
- Machine support for ORIGEN based on Samsung EXYNOS4210
-
-comment "EXYNOS4212 Boards"
-
-config MACH_SMDK4212
- bool "SMDK4212"
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C7
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C7
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_MFC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SOC_EXYNOS4212
- help
- Machine support for Samsung SMDK4212
-
-comment "EXYNOS4412 Boards"
-
-config MACH_SMDK4412
- bool "SMDK4412"
- select MACH_SMDK4212
- select SOC_EXYNOS4412
- help
- Machine support for Samsung SMDK4412
-endif
-
-endif
-
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
+ default y
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
+ select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
select S5P_DEV_MFC
- select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
depends on ARCH_EXYNOS5
select ARM_AMBA
select CLKSRC_OF
- select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-if ARCH_EXYNOS4
-
-comment "Configuration for HSMMC 8-bit bus width"
-
-config EXYNOS4_SDHCI_CH0_8BIT
- bool "Channel 0 with 8-bit bus"
- help
- Support HSMMC Channel 0 8-bit bus.
- If selected, Channel 1 is disabled.
-
-config EXYNOS4_SDHCI_CH2_8BIT
- bool "Channel 2 with 8-bit bus"
- help
- Support HSMMC Channel 2 8-bit bus.
- If selected, Channel 3 is disabled.
-endif
-
endmenu
endif
projects / karo-tx-linux.git / blobdiff