#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <media/soc_camera.h>
+
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
.id = -1
};
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+ {
+ I2C_BOARD_INFO("ov6650", 0x60),
+ },
+};
+
+#ifdef CONFIG_LEDS_TRIGGERS
+DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
+
+static int ams_delta_camera_power(struct device *dev, int power)
+{
+ /*
+ * turn on camera LED
+ */
+ if (power)
+ led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
+ else
+ led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
+ return 0;
+}
+#else
+#define ams_delta_camera_power NULL
+#endif
+
+static struct soc_camera_link __initdata ams_delta_iclink = {
+ .bus_id = 0, /* OMAP1 SoC camera bus */
+ .i2c_adapter_id = 1,
+ .board_info = &ams_delta_camera_board_info[0],
+ .module_name = "ov6650",
+ .power = ams_delta_camera_power,
+};
+
+static struct platform_device ams_delta_camera_device = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &ams_delta_iclink,
+ },
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+ .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
+ .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
+};
+
static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_kp_device,
&ams_delta_lcd_device,
&ams_delta_led_device,
+ &ams_delta_camera_device,
};
static void __init ams_delta_init(void)
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
+ /* parallel camera interface */
+ omap_cfg_reg(H19_1610_CAM_EXCLK);
+ omap_cfg_reg(J15_1610_CAM_LCLK);
+ omap_cfg_reg(L18_1610_CAM_VS);
+ omap_cfg_reg(L15_1610_CAM_HS);
+ omap_cfg_reg(L19_1610_CAM_D0);
+ omap_cfg_reg(K14_1610_CAM_D1);
+ omap_cfg_reg(K15_1610_CAM_D2);
+ omap_cfg_reg(K19_1610_CAM_D3);
+ omap_cfg_reg(K18_1610_CAM_D4);
+ omap_cfg_reg(J14_1610_CAM_D5);
+ omap_cfg_reg(J19_1610_CAM_D6);
+ omap_cfg_reg(J18_1610_CAM_D7);
+
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
ams_delta_latch2_write(~0, 0);
omap1_usb_init(&ams_delta_usb_config);
+ omap1_set_camera_info(&ams_delta_camera_platform_data);
+#ifdef CONFIG_LEDS_TRIGGERS
+ led_trigger_register_simple("ams_delta_camera",
+ &ams_delta_camera_led_trigger);
+#endif
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
-#ifdef CONFIG_AMS_DELTA_FIQ
ams_delta_init_fiq();
-#endif
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
- .membase = (void *) AMS_DELTA_MODEM_VIRT,
+ .membase = IOMEM(AMS_DELTA_MODEM_VIRT),
.mapbase = AMS_DELTA_MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
{
int err;
+ if (!machine_is_ams_delta())
+ return -ENODEV;
+
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
- .phys_io = 0xfff00000,
- .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = ams_delta_map_io,
.reserve = omap_reserve,