#include <linux/mtd/nand.h>
#include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/timer-gp.h>
+#include "mux.h"
#include "mmc-twl4030.h"
#define GPMC_CS0_BASE 0x60
unsigned gpio, unsigned ngpio)
{
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
- omap_cfg_reg(AG9_34XX_GPIO23);
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
- omap_cfg_reg(AH8_34XX_GPIO29);
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
.reset_gpio_port[2] = -EINVAL
};
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux NULL
+#endif
+
static void __init omap3_beagle_init(void)
{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_serial_init();
- omap_cfg_reg(J25_34XX_GPIO170);
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
omap3beagle_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3_beagle_map_io(void)