omap2/3: make serial_in_override() address the right uart port

[mv-sheeva.git] / arch / arm / mach-omap2 / board-overo.c

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 52dfd51a938ec8d8148afe024fb798ae5ef29a27..d192dd98a591779ac126fdf3c3ab0fbb2b489f51 100644 (file)
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
@@ -44,9 +44,9 @@
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -405,9 +405,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
        .reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+       { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux      NULL
+#endif
 
 static void __init overo_init(void)
 {
+       omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
        overo_i2c_init();
        platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
        omap_serial_init();
@@ -418,8 +426,8 @@ static void __init overo_init(void)
        overo_init_smsc911x();
 
        /* Ensure SDRC pins are mux'd for self-refresh */
-       omap_cfg_reg(H16_34XX_SDRC_CKE0);
-       omap_cfg_reg(H17_34XX_SDRC_CKE1);
+       omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+       omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
        if ((gpio_request(OVERO_GPIO_W2W_NRESET,
                          "OVERO_GPIO_W2W_NRESET") == 0) &&