#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
#include "mmc-twl4030.h"
-static void __init omap_zoom2_init_irq(void)
+/* Zoom2 has Qwerty keyboard*/
+static int board_keymap[] = {
+ KEY(0, 0, KEY_E),
+ KEY(1, 0, KEY_R),
+ KEY(2, 0, KEY_T),
+ KEY(3, 0, KEY_HOME),
+ KEY(6, 0, KEY_I),
+ KEY(7, 0, KEY_LEFTSHIFT),
+ KEY(0, 1, KEY_D),
+ KEY(1, 1, KEY_F),
+ KEY(2, 1, KEY_G),
+ KEY(3, 1, KEY_SEND),
+ KEY(6, 1, KEY_K),
+ KEY(7, 1, KEY_ENTER),
+ KEY(0, 2, KEY_X),
+ KEY(1, 2, KEY_C),
+ KEY(2, 2, KEY_V),
+ KEY(3, 2, KEY_END),
+ KEY(6, 2, KEY_DOT),
+ KEY(7, 2, KEY_CAPSLOCK),
+ KEY(0, 3, KEY_Z),
+ KEY(1, 3, KEY_KPPLUS),
+ KEY(2, 3, KEY_B),
+ KEY(3, 3, KEY_F1),
+ KEY(6, 3, KEY_O),
+ KEY(7, 3, KEY_SPACE),
+ KEY(0, 4, KEY_W),
+ KEY(1, 4, KEY_Y),
+ KEY(2, 4, KEY_U),
+ KEY(3, 4, KEY_F2),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(6, 4, KEY_L),
+ KEY(7, 4, KEY_LEFT),
+ KEY(0, 5, KEY_S),
+ KEY(1, 5, KEY_H),
+ KEY(2, 5, KEY_J),
+ KEY(3, 5, KEY_F3),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ KEY(6, 5, KEY_M),
+ KEY(4, 5, KEY_ENTER),
+ KEY(7, 5, KEY_RIGHT),
+ KEY(0, 6, KEY_Q),
+ KEY(1, 6, KEY_A),
+ KEY(2, 6, KEY_N),
+ KEY(3, 6, KEY_BACKSPACE),
+ KEY(6, 6, KEY_P),
+ KEY(7, 6, KEY_UP),
+ KEY(6, 7, KEY_SELECT),
+ KEY(7, 7, KEY_DOWN),
+ KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */
+ KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */
+ KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */
+ KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */
+ 0
+};
+
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+ .keymap_data = &board_map_data,
+ .rows = 8,
+ .cols = 8,
+ .rep = 1,
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 1850000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 4,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
{
- omap2_init_common_hw(NULL);
- omap_init_irq();
- omap_gpio_init();
+ /* gpio + 0 is "mmc0_cd" (input/IRQ),
+ * gpio + 1 is "mmc1_cd" (input/IRQ)
+ */
+ mmc[0].gpio_cd = gpio + 0;
+ mmc[1].gpio_cd = gpio + 1;
+ twl4030_mmc_init(mmc);
+
+ /* link regulators to MMC adapters ... we "know" the
+ * regulators will be set up only *after* we return.
+ */
+ zoom2_vmmc1_supply.dev = mmc[0].dev;
+ zoom2_vsim_supply.dev = mmc[0].dev;
+ zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+ return 0;
}
-static struct omap_uart_config zoom2_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
};
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
- { OMAP_TAG_UART, &zoom2_uart_config },
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+ .battery_tmp_tbl = zoom2_batt_table,
+ .tblsize = ARRAY_SIZE(zoom2_batt_table),
+};
+
+static struct twl4030_usb_data zoom2_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
};
+static void __init omap_zoom2_init_irq(void)
+{
+ omap_board_config = zoom2_config;
+ omap_board_config_size = ARRAY_SIZE(zoom2_config);
+ omap2_init_common_hw(NULL, NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
static struct twl4030_gpio_platform_data zoom2_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+ .irq_line = 1,
};
static struct twl4030_platform_data zoom2_twldata = {
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
+ .bci = &zoom2_bci_data,
+ .madc = &zoom2_madc_data,
+ .usb = &zoom2_usb_data,
.gpio = &zoom2_gpio_data,
+ .keypad = &zoom2_kp_twl4030_data,
+ .vmmc1 = &zoom2_vmmc1,
+ .vmmc2 = &zoom2_vmmc2,
+ .vsim = &zoom2_vsim,
+
};
static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
return 0;
}
-static struct twl4030_hsmmc_info mmc[] __initdata = {
- {
- .mmc = 1,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {} /* Terminator */
-};
-
extern int __init omap_zoom2_debugboard_init(void);
static void __init omap_zoom2_init(void)
{
omap_i2c_init();
- omap_board_config = zoom2_config;
- omap_board_config_size = ARRAY_SIZE(zoom2_config);
omap_serial_init();
omap_zoom2_debugboard_init();
- twl4030_mmc_init(mmc);
usb_musb_init();
}