#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/hardware.h>
#include <asm/arch/pxa3xx-regs.h>
HSS / 1000000, (HSS % 1000000) / 10000);
}
- return CLK;
+ return CLK / 1000;
}
/*
PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev),
PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev),
+ PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
+
+ PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
+ PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
+ PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+ PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+
+ PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
+ PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
+ PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
+#ifdef CONFIG_PM
+#define SLEEP_SAVE_SIZE 4
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
+static void __iomem *sram;
+static unsigned long wakeup_src;
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+ pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+
+ if (CKENA & (1 << CKEN_USBH)) {
+ printk(KERN_ERR "PM: USB host clock not stopped?\n");
+ CKENA &= ~(1 << CKEN_USBH);
+ }
+// CKENA |= 1 << (CKEN_ISC & 31);
+
+ /*
+ * Low power modes require the HSIO2 clock to be enabled.
+ */
+ CKENB |= 1 << (CKEN_HSIO2 & 31);
+}
+
+static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
+{
+ CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+}
+
+/*
+ * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
+ * memory controller has to be reinitialised, so we place some code
+ * in the SRAM to perform this function.
+ *
+ * We disable FIQs across the standby - otherwise, we might receive a
+ * FIQ while the SDRAM is unavailable.
+ */
+static void pxa3xx_cpu_standby(unsigned int pwrmode)
+{
+ extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+ void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
+
+ memcpy_toio(sram + 0x8000, pm_enter_standby_start,
+ pm_enter_standby_end - pm_enter_standby_start);
+
+ AD2D0SR = ~0;
+ AD2D1SR = ~0;
+ AD2D0ER = wakeup_src;
+ AD2D1ER = 0;
+ ASCR = ASCR;
+ ARSR = ARSR;
+
+ local_fiq_disable();
+ fn(pwrmode);
+ local_fiq_enable();
+
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+
+ printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
+}
+
+static void pxa3xx_cpu_pm_enter(suspend_state_t state)
+{
+ /*
+ * Don't sleep if no wakeup sources are defined
+ */
+ if (wakeup_src == 0)
+ return;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
+ break;
+
+ case PM_SUSPEND_MEM:
+ break;
+ }
+}
+
+static int pxa3xx_cpu_pm_valid(suspend_state_t state)
+{
+ return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
+}
+
+static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
+ .save_size = SLEEP_SAVE_SIZE,
+ .save = pxa3xx_cpu_pm_save,
+ .restore = pxa3xx_cpu_pm_restore,
+ .valid = pxa3xx_cpu_pm_valid,
+ .enter = pxa3xx_cpu_pm_enter,
};
+static void __init pxa3xx_init_pm(void)
+{
+ sram = ioremap(ISRAM_START, ISRAM_SIZE);
+ if (!sram) {
+ printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
+ return;
+ }
+
+ /*
+ * Since we copy wakeup code into the SRAM, we need to ensure
+ * that it is preserved over the low power modes. Note: bit 8
+ * is undocumented in the developer manual, but must be set.
+ */
+ AD1R |= ADXR_L2 | ADXR_R0;
+ AD2R |= ADXR_L2 | ADXR_R0;
+ AD3R |= ADXR_L2 | ADXR_R0;
+
+ /*
+ * Clear the resume enable registers.
+ */
+ AD1D0ER = 0;
+ AD2D0ER = 0;
+ AD2D1ER = 0;
+ AD3ER = 0;
+
+ pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
+}
+
+static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
+{
+ unsigned long flags, mask = 0;
+
+ switch (irq) {
+ case IRQ_SSP3:
+ mask = ADXER_MFP_WSSP3;
+ break;
+ case IRQ_MSL:
+ mask = ADXER_WMSL0;
+ break;
+ case IRQ_USBH2:
+ case IRQ_USBH1:
+ mask = ADXER_WUSBH;
+ break;
+ case IRQ_KEYPAD:
+ mask = ADXER_WKP;
+ break;
+ case IRQ_AC97:
+ mask = ADXER_MFP_WAC97;
+ break;
+ case IRQ_USIM:
+ mask = ADXER_WUSIM0;
+ break;
+ case IRQ_SSP2:
+ mask = ADXER_MFP_WSSP2;
+ break;
+ case IRQ_I2C:
+ mask = ADXER_MFP_WI2C;
+ break;
+ case IRQ_STUART:
+ mask = ADXER_MFP_WUART3;
+ break;
+ case IRQ_BTUART:
+ mask = ADXER_MFP_WUART2;
+ break;
+ case IRQ_FFUART:
+ mask = ADXER_MFP_WUART1;
+ break;
+ case IRQ_MMC:
+ mask = ADXER_MFP_WMMC1;
+ break;
+ case IRQ_SSP:
+ mask = ADXER_MFP_WSSP1;
+ break;
+ case IRQ_RTCAlrm:
+ mask = ADXER_WRTC;
+ break;
+ case IRQ_SSP4:
+ mask = ADXER_MFP_WSSP4;
+ break;
+ case IRQ_TSI:
+ mask = ADXER_WTSI;
+ break;
+ case IRQ_USIM2:
+ mask = ADXER_WUSIM1;
+ break;
+ case IRQ_MMC2:
+ mask = ADXER_MFP_WMMC2;
+ break;
+ case IRQ_NAND:
+ mask = ADXER_MFP_WFLASH;
+ break;
+ case IRQ_USB2:
+ mask = ADXER_WUSB2;
+ break;
+ case IRQ_WAKEUP0:
+ mask = ADXER_WEXTWAKE0;
+ break;
+ case IRQ_WAKEUP1:
+ mask = ADXER_WEXTWAKE1;
+ break;
+ case IRQ_MMC3:
+ mask = ADXER_MFP_GEN12;
+ break;
+ }
+
+ local_irq_save(flags);
+ if (on)
+ wakeup_src |= mask;
+ else
+ wakeup_src &= ~mask;
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void pxa3xx_init_irq_pm(void)
+{
+ pxa_init_irq_set_wake(pxa3xx_set_wake);
+}
+
+#else
+static inline void pxa3xx_init_pm(void) {}
+static inline void pxa3xx_init_irq_pm(void) {}
+#endif
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
pxa_init_irq_low();
pxa_init_irq_high();
pxa_init_irq_gpio(128);
+ pxa3xx_init_irq_pm();
}
/*
*/
static struct platform_device *devices[] __initdata = {
- &pxa_device_mci,
&pxa_device_udc,
- &pxa_device_fb,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
- &pxa_device_i2c,
&pxa_device_i2s,
- &pxa_device_ficp,
&pxa_device_rtc,
+ &pxa27x_device_ssp1,
+ &pxa27x_device_ssp2,
+ &pxa27x_device_ssp3,
+ &pxa3xx_device_ssp4,
};
static int __init pxa3xx_init(void)
if ((ret = pxa_init_dma(32)))
return ret;
+ pxa3xx_init_pm();
+
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
return 0;
projects / mv-sheeva.git / blobdiff