#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
-#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/reset.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/iic-core.h>
#include <plat/fb-core.h>
#include <plat/nand-core.h>
+#include <plat/adc-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
IODESC_ENT(TIMER),
};
-struct sysdev_class s3c2416_sysclass = {
+struct bus_type s3c2416_subsys = {
.name = "s3c2416-core",
+ .dev_name = "s3c2416-core",
};
-static struct sys_device s3c2416_sysdev = {
- .cls = &s3c2416_sysclass,
+static struct device s3c2416_dev = {
+ .bus = &s3c2416_subsys,
};
-static void s3c2416_hard_reset(void)
+void s3c2416_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- s3c24xx_reset_hook = s3c2416_hard_reset;
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */
s3c_fb_setname("s3c2443-fb");
+ s3c_adc_setname("s3c2416-adc");
+
#ifdef CONFIG_PM
register_syscore_ops(&s3c2416_pm_syscore_ops);
#endif
register_syscore_ops(&s3c24xx_irq_syscore_ops);
- return sysdev_register(&s3c2416_sysdev);
+ return device_register(&s3c2416_dev);
}
void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
void __init s3c2416_map_io(void)
{
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+ s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
+ s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
/* initialize device information early */
s3c2416_default_sdhci0();
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
-/* need to register class before we actually register the device, and
+/* need to register the subsystem before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2416 based system)
* as a driver which may support both 2443 and 2440 may try and use it.
static int __init s3c2416_core_init(void)
{
- return sysdev_class_register(&s3c2416_sysclass);
+ return subsys_system_register(&s3c2416_subsys, NULL);
}
core_initcall(s3c2416_core_init);