config SYS_CONFIG_NAME
default "uniphier"
-config UNIPHIER_SMP
+config ARCH_UNIPHIER_32BIT
bool
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select ARMV7_NONSEC
+ select ARCH_SUPPORT_PSCI
-config ARCH_UNIPHIER_PH1_SLD3
+config ARCH_UNIPHIER_64BIT
+ bool
+ select ARM64
+ select SPL_SEPARATE_BSS
+ select ARMV8_MULTIENTRY
+ select ARMV8_SPIN_TABLE
+
+choice
+ prompt "UniPhier SoC select"
+ default ARCH_UNIPHIER_PRO4
+
+config ARCH_UNIPHIER_SLD3
bool "UniPhier PH1-sLD3 SoC"
- select UNIPHIER_SMP
- help
- This enables support for UniPhier PH1-sLD3 SoC.
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PH1_LD4
- bool "UniPhier PH1-LD4 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3
- help
- This enables support for UniPhier PH1-LD4 SoC.
+config ARCH_UNIPHIER_LD4_SLD8
+ bool "UniPhier PH1-LD4/PH1-sLD8 SoC"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PH1_PRO4
+config ARCH_UNIPHIER_PRO4
bool "UniPhier PH1-Pro4 SoC"
- select UNIPHIER_SMP
- depends on !ARCH_UNIPHIER_PH1_SLD3 && \
- !ARCH_UNIPHIER_PH1_LD4 && \
- !ARCH_UNIPHIER_PH1_SLD8
- help
- This enables support for UniPhier PH1-Pro4 SoC.
+ select ARCH_UNIPHIER_32BIT
+
+config ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ bool "UniPhier PH1-Pro5/ProXstream2/PH1-LD6b SoC"
+ select ARCH_UNIPHIER_32BIT
-config ARCH_UNIPHIER_PH1_SLD8
- bool "UniPhier PH1-sLD8 SoC"
- depends on !ARCH_UNIPHIER_PH1_SLD3
+config ARCH_UNIPHIER_LD11
+ bool "UniPhier PH1-LD11 SoC"
+ select ARCH_UNIPHIER_64BIT
+
+config ARCH_UNIPHIER_LD20
+ bool "UniPhier PH1-LD20 SoC"
+ select ARCH_UNIPHIER_64BIT
+ select OF_BOARD_SETUP
+
+endchoice
+
+config ARCH_UNIPHIER_LD4
+ bool "Enable UniPhier PH1-LD4 SoC support"
+ depends on ARCH_UNIPHIER_LD4_SLD8
+ default y
+
+config ARCH_UNIPHIER_SLD8
+ bool "Enable UniPhier PH1-sLD8 SoC support"
+ depends on ARCH_UNIPHIER_LD4_SLD8
+ default y
+
+config ARCH_UNIPHIER_PRO5
+ bool "Enable UniPhier PH1-Pro5 SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
+
+config ARCH_UNIPHIER_PXS2
+ bool "Enable UniPhier ProXstream2 SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
+
+config ARCH_UNIPHIER_LD6B
+ bool "Enable UniPhier PH1-LD6b SoC support"
+ depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
+ default y
+
+config CACHE_UNIPHIER
+ bool "Enable the UniPhier L2 cache controller"
+ depends on ARCH_UNIPHIER_32BIT
+ select SYS_CACHE_SHIFT_7
+ default y
help
- This enables support for UniPhier PH1-sLD8 SoC.
+ This option allows to use the UniPhier System Cache as L2 cache.
config MICRO_SUPPORT_CARD
bool "Use Micro Support Card"
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
+ depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || ARCH_UNIPHIER_SLD8
+ default y
help
The command "ddrphy" shows the resulting parameters of DDR PHY
training; it is useful for the evaluation of DDR PHY training.
+config CMD_DDRMPHY_DUMP
+ bool "Enable dump command of DDR Multi PHY parameters"
+ depends on ARCH_UNIPHIER_PXS2 || ARCH_UNIPHIER_LD6B
+ default y
+ help
+ The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
+ training; it is useful for the evaluation of DDR Multi PHY training.
+
endif