#include <linux/pagemap.h>
#include <linux/io.h>
#include <linux/memblock.h>
+#include <linux/kernel.h>
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/mach/arch.h>
+#include <asm/cputype.h>
+#include <asm/mpu.h>
#include "mm.h"
+#ifdef CONFIG_ARM_MPU
+struct mpu_rgn_info mpu_rgn_info;
+
+/* Region number */
+static void rgnr_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c2, 0" : : "r" (v));
+}
+
+/* Data-side / unified region attributes */
+
+/* Region access control register */
+static void dracr_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 4" : : "r" (v));
+}
+
+/* Region size register */
+static void drsr_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 2" : : "r" (v));
+}
+
+/* Region base address register */
+static void drbar_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 0" : : "r" (v));
+}
+
+static u32 drbar_read(void)
+{
+ u32 v;
+ asm("mrc p15, 0, %0, c6, c1, 0" : "=r" (v));
+ return v;
+}
+/* Optional instruction-side region attributes */
+
+/* I-side Region access control register */
+static void iracr_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 5" : : "r" (v));
+}
+
+/* I-side Region size register */
+static void irsr_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 3" : : "r" (v));
+}
+
+/* I-side Region base address register */
+static void irbar_write(u32 v)
+{
+ asm("mcr p15, 0, %0, c6, c1, 1" : : "r" (v));
+}
+
+static unsigned long irbar_read(void)
+{
+ unsigned long v;
+ asm("mrc p15, 0, %0, c6, c1, 1" : "=r" (v));
+ return v;
+}
+
+/* MPU initialisation functions */
+void __init sanity_check_meminfo_mpu(void)
+{
+ int i;
+ struct membank *bank = meminfo.bank;
+ phys_addr_t phys_offset = PHYS_OFFSET;
+ phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
+
+ /* Initially only use memory continuous from PHYS_OFFSET */
+ if (bank_phys_start(&bank[0]) != phys_offset)
+ panic("First memory bank must be contiguous from PHYS_OFFSET");
+
+ /* Banks have already been sorted by start address */
+ for (i = 1; i < meminfo.nr_banks; i++) {
+ if (bank[i].start <= bank_phys_end(&bank[0]) &&
+ bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) {
+ bank[0].size = bank_phys_end(&bank[i]) - bank[0].start;
+ } else {
+ pr_notice("Ignoring RAM after 0x%.8lx. "
+ "First non-contiguous (ignored) bank start: 0x%.8lx\n",
+ (unsigned long)bank_phys_end(&bank[0]),
+ (unsigned long)bank_phys_start(&bank[i]));
+ break;
+ }
+ }
+ /* All contiguous banks are now merged in to the first bank */
+ meminfo.nr_banks = 1;
+ specified_mem_size = bank[0].size;
+
+ /*
+ * MPU has curious alignment requirements: Size must be power of 2, and
+ * region start must be aligned to the region size
+ */
+ if (phys_offset != 0)
+ pr_info("PHYS_OFFSET != 0 => MPU Region size constrained by alignment requirements\n");
+
+ /*
+ * Maximum aligned region might overflow phys_addr_t if phys_offset is
+ * 0. Hence we keep everything below 4G until we take the smaller of
+ * the aligned_region_size and rounded_mem_size, one of which is
+ * guaranteed to be smaller than the maximum physical address.
+ */
+ aligned_region_size = (phys_offset - 1) ^ (phys_offset);
+ /* Find the max power-of-two sized region that fits inside our bank */
+ rounded_mem_size = (1 << __fls(bank[0].size)) - 1;
+
+ /* The actual region size is the smaller of the two */
+ aligned_region_size = aligned_region_size < rounded_mem_size
+ ? aligned_region_size + 1
+ : rounded_mem_size + 1;
+
+ if (aligned_region_size != specified_mem_size)
+ pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)",
+ (unsigned long)specified_mem_size,
+ (unsigned long)aligned_region_size);
+
+ meminfo.bank[0].size = aligned_region_size;
+ pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n",
+ (unsigned long)phys_offset,
+ (unsigned long)aligned_region_size,
+ (unsigned long)bank_phys_end(&bank[0]));
+
+}
+
+static int mpu_present(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
+}
+
+static int mpu_max_regions(void)
+{
+ /*
+ * We don't support a different number of I/D side regions so if we
+ * have separate instruction and data memory maps then return
+ * whichever side has a smaller number of supported regions.
+ */
+ u32 dregions, iregions, mpuir;
+ mpuir = read_cpuid(CPUID_MPUIR);
+
+ dregions = iregions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
+
+ /* Check for separate d-side and i-side memory maps */
+ if (mpuir & MPUIR_nU)
+ iregions = (mpuir & MPUIR_IREGION_SZMASK) >> MPUIR_IREGION;
+
+ /* Use the smallest of the two maxima */
+ return min(dregions, iregions);
+}
+
+static int mpu_iside_independent(void)
+{
+ /* MPUIR.nU specifies whether there is *not* a unified memory map */
+ return read_cpuid(CPUID_MPUIR) & MPUIR_nU;
+}
+
+static int mpu_min_region_order(void)
+{
+ u32 drbar_result, irbar_result;
+ /* We've kept a region free for this probing */
+ rgnr_write(MPU_PROBE_REGION);
+ isb();
+ /*
+ * As per ARM ARM, write 0xFFFFFFFC to DRBAR to find the minimum
+ * region order
+ */
+ drbar_write(0xFFFFFFFC);
+ drbar_result = irbar_result = drbar_read();
+ drbar_write(0x0);
+ /* If the MPU is non-unified, we use the larger of the two minima*/
+ if (mpu_iside_independent()) {
+ irbar_write(0xFFFFFFFC);
+ irbar_result = irbar_read();
+ irbar_write(0x0);
+ }
+ isb(); /* Ensure that MPU region operations have completed */
+ /* Return whichever result is larger */
+ return __ffs(max(drbar_result, irbar_result));
+}
+
+static int mpu_setup_region(unsigned int number, phys_addr_t start,
+ unsigned int size_order, unsigned int properties)
+{
+ u32 size_data;
+
+ /* We kept a region free for probing resolution of MPU regions*/
+ if (number > mpu_max_regions() || number == MPU_PROBE_REGION)
+ return -ENOENT;
+
+ if (size_order > 32)
+ return -ENOMEM;
+
+ if (size_order < mpu_min_region_order())
+ return -ENOMEM;
+
+ /* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */
+ size_data = ((size_order - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN;
+
+ dsb(); /* Ensure all previous data accesses occur with old mappings */
+ rgnr_write(number);
+ isb();
+ drbar_write(start);
+ dracr_write(properties);
+ isb(); /* Propagate properties before enabling region */
+ drsr_write(size_data);
+
+ /* Check for independent I-side registers */
+ if (mpu_iside_independent()) {
+ irbar_write(start);
+ iracr_write(properties);
+ isb();
+ irsr_write(size_data);
+ }
+ isb();
+
+ /* Store region info (we treat i/d side the same, so only store d) */
+ mpu_rgn_info.rgns[number].dracr = properties;
+ mpu_rgn_info.rgns[number].drbar = start;
+ mpu_rgn_info.rgns[number].drsr = size_data;
+ return 0;
+}
+
+/*
+* Set up default MPU regions, doing nothing if there is no MPU
+*/
+void __init mpu_setup(void)
+{
+ int region_err;
+ if (!mpu_present())
+ return;
+
+ region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
+ ilog2(meminfo.bank[0].size),
+ MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
+ if (region_err) {
+ panic("MPU region initialization failure! %d", region_err);
+ } else {
+ pr_info("Using ARMv7 PMSA Compliant MPU. "
+ "Region independence: %s, Max regions: %d\n",
+ mpu_iside_independent() ? "Yes" : "No",
+ mpu_max_regions());
+ }
+}
+#endif /* CONFIG_ARM_MPU */
+
void __init arm_mm_memblock_reserve(void)
{
#ifndef CONFIG_CPU_V7M
projects / karo-tx-linux.git / blobdiff