arm64: configs: enable drivers for CSI camera

[karo-tx-linux.git] / arch / arm64 / configs / defconfig

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 9eb4230f513e86d0042e6de5310ab880ef85b11d..74f2a5ada428c45de5bf9a7d26591a189909e5f1 100644 (file)
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -23,6 +23,7 @@ CONFIG_CGROUP_HUGETLB=y
 # CONFIG_NET_NS is not set
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_JUMP_LABEL=y
@@ -77,6 +78,8 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_QRTR=y
+CONFIG_QRTR_SMD=y
 CONFIG_BPF_JIT=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
@@ -145,6 +148,7 @@ CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
 CONFIG_I2C_QUP=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
@@ -153,8 +157,6 @@ CONFIG_SPMI=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_PL061=y
-CONFIG_GPIO_QCOM_SMSM=y
-CONFIG_GPIO_QCOM_SMP2P=y
 CONFIG_GPIO_XGENE=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_XGENE=y
@@ -173,8 +175,14 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_MSM_CAMSS_V4L2=y
+CONFIG_MSM_CCI=y
 CONFIG_MSM_VIDC_V4L2=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_OV5645=y
 CONFIG_DRM=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_FB_ARMCLCD=y
@@ -186,7 +194,7 @@ CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_QCOM=y
 CONFIG_SND_SOC_APQ8016_SBC=y
-CONFIG_SND_SOC_MSM8x16_WCD=y
+CONFIG_SND_SOC_MSM8916_WCD=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DYNAMIC_MINORS=y
@@ -212,9 +220,6 @@ CONFIG_USB_TEST=m
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_VERBOSE=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_ZERO=m
@@ -255,11 +260,16 @@ CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_QCOM_IOMMU_V1=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_TZ_PIL=y
+CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_WCNSS_CTRL=y
 CONFIG_MSM_BUS_SCALING=y
+CONFIG_QTI_LNX_GPS_PROXY=y
 CONFIG_BUS_TOPOLOGY_ADHOC=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_PHY_XGENE=y
@@ -292,7 +302,6 @@ CONFIG_LOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_PROVE_LOCKING=y
 # CONFIG_FTRACE is not set
 CONFIG_MEMTEST=y
 CONFIG_CORESIGHT=y