Blackfin arch: add BF54x missing GPIO access functions

[mv-sheeva.git] / arch / blackfin / Kconfig

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 1a493050932579f460dac6d77acd2d0c3fafc7e8..e01bfc7685b5a6f18c856454f1830e3d9b3d7881 100644 (file)
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -25,6 +25,10 @@ config BLACKFIN
        bool
        default y
 
+config ZONE_DMA
+       bool
+       default y
+
 config BFIN
        bool
        default y
@@ -67,6 +71,7 @@ config GENERIC_CALIBRATE_DELAY
 
 config IRQCHIP_DEMUX_GPIO
        bool
+       depends on (BF53x || BF561 || BF54x)
        default y
 
 source "init/Kconfig"
@@ -110,6 +115,26 @@ config BF537
        help
          BF537 Processor Support.
 
+config BF542
+       bool "BF542"
+       help
+         BF542 Processor Support.
+
+config BF544
+       bool "BF544"
+       help
+         BF544 Processor Support.
+
+config BF548
+       bool "BF548"
+       help
+         BF548 Processor Support.
+
+config BF549
+       bool "BF549"
+       help
+         BF549 Processor Support.
+
 config BF561
        bool "BF561"
        help
@@ -121,6 +146,11 @@ choice
        prompt "Silicon Rev"
        default BF_REV_0_2 if BF537
        default BF_REV_0_3 if BF533
+       default BF_REV_0_0 if BF549
+
+config BF_REV_0_0
+       bool "0.0"
+       depends on (BF549)
 
 config BF_REV_0_2
        bool "0.2"
@@ -138,8 +168,24 @@ config BF_REV_0_5
        bool "0.5"
        depends on (BF561 || BF533 || BF532 || BF531)
 
+config BF_REV_ANY
+       bool "any"
+
+config BF_REV_NONE
+       bool "none"
+
 endchoice
 
+config BF53x
+       bool
+       depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
+       default y
+
+config BF54x
+       bool
+       depends on (BF542 || BF544 || BF548 || BF549)
+       default y
+
 config BFIN_DUAL_CORE
        bool
        depends on (BF561)
@@ -188,8 +234,14 @@ config BFIN537_BLUETECHNIX_CM
        help
          CM-BF537 support for EVAL- and DEV-Board.
 
+config BFIN548_EZKIT
+       bool "BF548-EZKIT"
+       depends on (BF548 || BF549)
+         help
+         BFIN548-EZKIT board Support.
+
 config BFIN561_BLUETECHNIX_CM
-       bool "BF561-CM"
+       bool "Bluetechnix CM-BF561"
        depends on (BF561)
        help
          CM-BF561 support for EVAL- and DEV-Board.
@@ -200,6 +252,12 @@ config BFIN561_EZKIT
        help
          BF561-EZKIT-LITE board Support.
 
+config BFIN561_TEPLA
+       bool "BF561-TEPLA"
+       depends on (BF561)
+       help
+        BF561-TEPLA board Support.
+
 config PNAV10
        bool "PNAV 1.0 board"
        depends on (BF537)
@@ -249,6 +307,7 @@ config BFIN_SHARED_FLASH_ENET
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf548/Kconfig"
 
 menu "Board customizations"
 
@@ -384,41 +443,6 @@ config BFIN_IDLE_LED_PIN
        default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
        default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
 
-comment "Console UART Setup"
-
-choice
-       prompt "Baud Rate"
-       default BAUD_57600
-config BAUD_9600
-       bool "9600"
-config BAUD_19200
-       bool "19200"
-config BAUD_38400
-       bool "38400"
-config BAUD_57600
-       bool "57600"
-config BAUD_115200
-       bool "115200"
-endchoice
-
-choice
-       prompt "Parity"
-       default BAUD_NO_PARITY
-config  BAUD_NO_PARITY
-       bool "No Parity"
-config  BAUD_PARITY
-       bool "Parity"
-endchoice
-
-choice
-       prompt "Stop Bits"
-       default BAUD_1_STOPBIT
-config  BAUD_1_STOPBIT
-       bool "1"
-config  BAUD_2_STOPBIT
-       bool "2"
-endchoice
-
 endmenu
 
 
@@ -560,17 +584,9 @@ endchoice
 
 source "mm/Kconfig"
 
-config LARGE_ALLOCS
-       bool "Allow allocating large blocks (> 1MB) of memory"
-       help
-         Allow the slab memory allocator to keep chains for very large
-         memory sizes - upto 32MB. You may need this if your system has
-         a lot of RAM, and you need to able to allocate very large
-         contiguous chunks. If unsure, say N.
-
 config BFIN_DMA_5XX
        bool "Enable DMA Support"
-       depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
+       depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x)
        default y
        help
          DMA driver for BF5xx.
@@ -866,7 +882,7 @@ endchoice
 
 endmenu
 
-if (BF537 || BF533)
+if (BF537 || BF533 || BF54x)
 
 menu "CPU Frequency scaling"