#endif
};
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
- .num_chipselect = 1, /* master only supports one device */
+ .num_chipselect = MAX_BLACKFIN_GPIOS,
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
};
static struct bfin5xx_spi_master bfin_sport_spi1_info = {
- .num_chipselect = 1, /* master only supports one device */
+ .num_chipselect = MAX_BLACKFIN_GPIOS,
.enable_dma = 0, /* master don't support DMA */
.pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
};
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ 0,
+};
+
+static const struct ppi_info ppi_info = {
+ .type = PPI_TYPE_PPI,
+ .dma_ch = CH_PPI,
+ .irq_err = IRQ_PPI_ERROR,
+ .base = (void __iomem *)PPI_CONTROL,
+ .pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+ || defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+ {
+ .index = 0,
+ .name = "Camera",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = V4L2_STD_UNKNOWN,
+ },
+};
+
+static struct bcap_route vs6624_routes[] = {
+ {
+ .input = 0,
+ .output = 0,
+ },
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PF10;
+
+static struct bfin_capture_config bfin_capture_data = {
+ .card_name = "BF537",
+ .inputs = vs6624_inputs,
+ .num_inputs = ARRAY_SIZE(vs6624_inputs),
+ .routes = vs6624_routes,
+ .i2c_adapter_id = 0,
+ .board_info = {
+ .type = "vs6624",
+ .addr = 0x10,
+ .platform_data = (void *)&vs6624_ce_pin,
+ },
+ .ppi_info = &ppi_info,
+ .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+ .name = "bfin_capture",
+ .dev = {
+ .platform_data = &bfin_capture_data,
+ },
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
&bfin_spi0_device,
#endif
&bfin_lq035q1_device,
#endif
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+ || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+ &bfin_capture_device,
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,