#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
+#include <asm/sn/sn2/sn_hwperf.h>
+
+/*
+ * 1/26/2006
+ *
+ * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe
+ * (taken from the above PV) before and after accessing tioce internal MMR's
+ * to avoid tioce lockups.
+ *
+ * The recipe as taken from the PV:
+ *
+ * if(mmr address < 0x45000) {
+ * if(mmr address == 0 or 0x80)
+ * mmr wrt or read address 0xc0
+ * else if(mmr address == 0x148 or 0x200)
+ * mmr wrt or read address 0x28
+ * else
+ * mmr wrt or read address 0x158
+ *
+ * do desired mmr access (rd or wrt)
+ *
+ * if(mmr address == 0x100)
+ * mmr wrt or read address 0x38
+ * mmr wrt or read address 0xb050
+ * } else
+ * do desired mmr access
+ *
+ * According to hw, we can use reads instead of writes to the above addres
+ *
+ * Note this WAR can only to be used for accessing internal MMR's in the
+ * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
+ * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
+ * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
+ *
+ * All registers defined in struct tioce will meet that criteria.
+ */
+
+static void inline
+tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (u64)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ u64 mmr_war_offset;
+
+ if (mmr_offset == 0 || mmr_offset == 0x80)
+ mmr_war_offset = 0xc0;
+ else if (mmr_offset == 0x148 || mmr_offset == 0x200)
+ mmr_war_offset = 0x28;
+ else
+ mmr_war_offset = 0x158;
+
+ readq_relaxed((void *)(mmr_base + mmr_war_offset));
+ }
+}
+
+static void inline
+tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr)
+{
+ u64 mmr_base;
+ u64 mmr_offset;
+
+ if (kern->ce_common->ce_rev != TIOCE_REV_A)
+ return;
+
+ mmr_base = kern->ce_common->ce_pcibus.bs_base;
+ mmr_offset = (u64)mmr_addr - mmr_base;
+
+ if (mmr_offset < 0x45000) {
+ if (mmr_offset == 0x100)
+ readq_relaxed((void *)(mmr_base + 0x38));
+ readq_relaxed((void *)(mmr_base + 0xb050));
+ }
+}
+
+/* load mmr contents into a variable */
+#define tioce_mmr_load(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ *(varp) = readq_relaxed(mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store variable contents into mmr */
+#define tioce_mmr_store(kern, mmrp, varp) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(*varp, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store immediate value into mmr */
+#define tioce_mmr_storei(kern, mmrp, val) do {\
+ tioce_mmr_war_pre(kern, mmrp); \
+ writeq(val, mmrp); \
+ tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* set bits (immediate value) into mmr */
+#define tioce_mmr_seti(kern, mmrp, bits) do {\
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp |= (bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/* clear bits (immediate value) into mmr */
+#define tioce_mmr_clri(kern, mmrp, bits) do { \
+ u64 tmp; \
+ tioce_mmr_load(kern, mmrp, &tmp); \
+ tmp &= ~(bits); \
+ tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
/**
* Bus address ranges for the 5 flavors of TIOCE DMA
(ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
#define ATE_VALID(ate) ((ate) & (1UL << 63))
-#define ATE_MAKE(addr, ps) (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63))
+#define ATE_MAKE(addr, ps, msi) \
+ (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0))
/*
* Flavors of ate-based mapping supported by tioce_alloc_map()
#define TIOCE_ATE_M40 2
#define TIOCE_ATE_M40S 3
-#define KB(x) ((x) << 10)
-#define MB(x) ((x) << 20)
-#define GB(x) ((x) << 30)
+#define KB(x) ((u64)(x) << 10)
+#define MB(x) ((u64)(x) << 20)
+#define GB(x) ((u64)(x) << 30)
/**
* tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
*
* 63 - must be 1 to indicate d64 mode to CE hardware
* 62 - barrier bit ... controlled with tioce_dma_barrier()
- * 61 - 0 since this is not an MSI transaction
+ * 61 - msi bit ... specified through dma_flags
* 60:54 - reserved, MBZ
*/
-static uint64_t
-tioce_dma_d64(unsigned long ct_addr)
+static u64
+tioce_dma_d64(unsigned long ct_addr, int dma_flags)
{
- uint64_t bus_addr;
+ u64 bus_addr;
bus_addr = ct_addr | (1UL << 63);
+ if (dma_flags & SN_DMA_MSI)
+ bus_addr |= (1UL << 61);
return bus_addr;
}
* length, and if enough resources exist, fill in the ATE's and construct a
* tioce_dmamap struct to track the mapping.
*/
-static uint64_t
+static u64
tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
- uint64_t ct_addr, int len)
+ u64 ct_addr, int len, int dma_flags)
{
int i;
int j;
int last;
int entries;
int nates;
- int pagesize;
- uint64_t *ate_shadow;
- uint64_t *ate_reg;
- uint64_t addr;
+ u64 pagesize;
+ int msi_capable, msi_wanted;
+ u64 *ate_shadow;
+ u64 *ate_reg;
+ u64 addr;
struct tioce *ce_mmr;
- uint64_t bus_base;
+ u64 bus_base;
struct tioce_dmamap *map;
ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
ate_reg = ce_mmr->ce_ure_ate3240;
pagesize = ce_kern->ce_ate3240_pagesize;
bus_base = TIOCE_M32_MIN;
+ msi_capable = 1;
break;
case TIOCE_ATE_M40:
first = 0;
ate_reg = ce_mmr->ce_ure_ate40;
pagesize = MB(64);
bus_base = TIOCE_M40_MIN;
+ msi_capable = 0;
break;
case TIOCE_ATE_M40S:
/*
ate_reg = ce_mmr->ce_ure_ate3240;
pagesize = GB(16);
bus_base = TIOCE_M40S_MIN;
+ msi_capable = 0;
break;
default:
return 0;
}
+ msi_wanted = dma_flags & SN_DMA_MSI;
+ if (msi_wanted && !msi_capable)
+ return 0;
+
nates = ATE_NPAGES(ct_addr, len, pagesize);
if (nates > entries)
return 0;
addr = ct_addr;
for (j = 0; j < nates; j++) {
- uint64_t ate;
+ u64 ate;
- ate = ATE_MAKE(addr, pagesize);
+ ate = ATE_MAKE(addr, pagesize, msi_wanted);
ate_shadow[i + j] = ate;
- writeq(ate, &ate_reg[i + j]);
+ tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
addr += pagesize;
}
*
* Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
*/
-static uint64_t
-tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
+static u64
+tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags)
{
int dma_ok;
int port;
struct tioce *ce_mmr;
struct tioce_kernel *ce_kern;
- uint64_t ct_upper;
- uint64_t ct_lower;
+ u64 ct_upper;
+ u64 ct_lower;
dma_addr_t bus_addr;
+ if (dma_flags & SN_DMA_MSI)
+ return 0;
+
ct_upper = ct_addr & ~0x3fffffffUL;
ct_lower = ct_addr & 0x3fffffffUL;
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- uint64_t tmp;
+ u64 tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ ct_upper);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
* Given a TIOCE bus address, set the appropriate bit to indicate barrier
* attributes.
*/
-static uint64_t
-tioce_dma_barrier(uint64_t bus_addr, int on)
+static u64
+tioce_dma_barrier(u64 bus_addr, int on)
{
- uint64_t barrier_bit;
+ u64 barrier_bit;
/* barrier not supported in M40/M40S mode */
if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
- writeq(0, &ce_mmr->ce_ure_dir_map[port]);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+ 0);
}
} else {
struct tioce_dmamap *map;
list_for_each_entry(map, &ce_kern->ce_dmamap_list,
ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->pci_start + map->nbytes - 1;
if (bus_addr >= map->pci_start && bus_addr <= last)
} else if (--map->refcnt == 0) {
for (i = 0; i < map->ate_count; i++) {
map->ate_shadow[i] = 0;
- map->ate_hw[i] = 0;
+ tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
}
list_del(&map->ce_dmamap_list);
* This is the main wrapper for mapping host physical pages to CE PCI space.
* The mapping mode used is based on the device's dma_mask.
*/
-static uint64_t
-tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
- int barrier)
+static u64
+tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
+ int barrier, int dma_flags)
{
unsigned long flags;
- uint64_t ct_addr;
- uint64_t mapaddr = 0;
+ u64 ct_addr;
+ u64 mapaddr = 0;
struct tioce_kernel *ce_kern;
struct tioce_dmamap *map;
int port;
- uint64_t dma_mask;
+ u64 dma_mask;
dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
if (dma_mask < 0x7fffffffUL)
return 0;
- ct_addr = PHYS_TO_TIODMA(paddr);
+ if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
+ ct_addr = PHYS_TO_TIODMA(paddr);
+ else
+ ct_addr = paddr;
/*
* If the device can generate 64 bit addresses, create a D64 map.
- * Since this should never fail, bypass the rest of the checks.
*/
if (dma_mask == ~0UL) {
- mapaddr = tioce_dma_d64(ct_addr);
- goto dma_map_done;
+ mapaddr = tioce_dma_d64(ct_addr, dma_flags);
+ if (mapaddr)
+ goto dma_map_done;
}
pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
* address bits than this device can support.
*/
list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->ct_start + map->nbytes - 1;
if (ct_addr >= map->ct_start &&
if (byte_count > MB(64)) {
mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
- port, ct_addr, byte_count);
+ port, ct_addr, byte_count,
+ dma_flags);
if (!mapaddr)
mapaddr =
tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
- ct_addr, byte_count);
+ ct_addr, byte_count,
+ dma_flags);
} else {
mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
- ct_addr, byte_count);
+ ct_addr, byte_count,
+ dma_flags);
if (!mapaddr)
mapaddr =
tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
- port, ct_addr, byte_count);
+ port, ct_addr, byte_count,
+ dma_flags);
}
}
* 32-bit direct is the next mode to try
*/
if (!mapaddr && dma_mask >= 0xffffffffUL)
- mapaddr = tioce_dma_d32(pdev, ct_addr);
+ mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags);
/*
* Last resort, try 32-bit ATE-based map.
if (!mapaddr)
mapaddr =
tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
- byte_count);
+ byte_count, dma_flags);
spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
dma_map_done:
- if (mapaddr & barrier)
+ if (mapaddr && barrier)
mapaddr = tioce_dma_barrier(mapaddr, 1);
return mapaddr;
* Simply call tioce_do_dma_map() to create a map with the barrier bit clear
* in the address.
*/
-static uint64_t
-tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+static u64
+tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
{
- return tioce_do_dma_map(pdev, paddr, byte_count, 0);
+ return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
}
/**
*
* Simply call tioce_do_dma_map() to create a map with the barrier bit set
* in the address.
- */ static uint64_t
-tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+ */ static u64
+tioce_dma_consistent(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
{
- return tioce_do_dma_map(pdev, paddr, byte_count, 1);
+ return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
}
/**
soft->ce_pcibus.bs_persist_segment,
soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+ if (ret_stuff.v0)
+ panic("tioce_error_intr_handler: Fatal TIOCE error");
+
return IRQ_HANDLED;
}
+/**
+ * tioce_reserve_m32 - reserve M32 ate's for the indicated address range
+ * @tioce_kernel: TIOCE context to reserve ate's for
+ * @base: starting bus address to reserve
+ * @limit: last bus address to reserve
+ *
+ * If base/limit falls within the range of bus space mapped through the
+ * M32 space, reserve the resources corresponding to the range.
+ */
+static void
+tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
+{
+ int ate_index, last_ate, ps;
+ struct tioce *ce_mmr;
+
+ ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
+ ps = ce_kern->ce_ate3240_pagesize;
+ ate_index = ATE_PAGE(base, ps);
+ last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
+
+ if (ate_index < 64)
+ ate_index = 64;
+
+ if (last_ate >= TIOCE_NUM_M3240_ATES)
+ last_ate = TIOCE_NUM_M3240_ATES - 1;
+
+ while (ate_index <= last_ate) {
+ u64 ate;
+
+ ate = ATE_MAKE(0xdeadbeef, ps, 0);
+ ce_kern->ce_ate3240_shadow[ate_index] = ate;
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
+ ate);
+ ate_index++;
+ }
+}
+
/**
* tioce_kern_init - init kernel structures related to a given TIOCE
* @tioce_common: ptr to a cached tioce_common struct that originated in prom
- */ static struct tioce_kernel *
+ */
+static struct tioce_kernel *
tioce_kern_init(struct tioce_common *tioce_common)
{
int i;
- uint32_t tmp;
+ int ps;
+ int dev;
+ u32 tmp;
+ unsigned int seg, bus;
struct tioce *tioce_mmr;
struct tioce_kernel *tioce_kern;
tioce_kern->ce_common = tioce_common;
spin_lock_init(&tioce_kern->ce_lock);
INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
- tioce_common->ce_kernel_private = (uint64_t) tioce_kern;
+ tioce_common->ce_kernel_private = (u64) tioce_kern;
/*
* Determine the secondary bus number of the port2 logical PPB.
* here to use pci_read_config_xxx() so use the raw_pci_ops vector.
*/
- raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
- tioce_common->ce_pcibus.bs_persist_busnum,
- PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
- tioce_kern->ce_port1_secondary = (uint8_t) tmp;
+ seg = tioce_common->ce_pcibus.bs_persist_segment;
+ bus = tioce_common->ce_pcibus.bs_persist_busnum;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
+ tioce_kern->ce_port1_secondary = (u8) tmp;
/*
* Set PMU pagesize to the largest size available, and zero out
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
- __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
- __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
- tioce_kern->ce_ate3240_pagesize = KB(256);
+ tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_PAGESIZE_MASK);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
+ CE_URE_256K_PAGESIZE);
+ ps = tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
- writeq(0, &tioce_mmr->ce_ure_ate40[i]);
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
- writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
+ tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
+ }
+
+ /*
+ * Reserve ATE's corresponding to reserved address ranges. These
+ * include:
+ *
+ * Memory space covered by each PPB mem base/limit register
+ * Memory space covered by each PPB prefetch base/limit register
+ *
+ * These bus ranges are for pio (downstream) traffic only, and so
+ * cannot be used for DMA.
+ */
+
+ for (dev = 1; dev <= 2; dev++) {
+ u64 base, limit;
+
+ /* mem base/limit */
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_BASE, 2, &tmp);
+ base = (u64)tmp << 16;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_MEMORY_LIMIT, 2, &tmp);
+ limit = (u64)tmp << 16;
+ limit |= 0xfffffUL;
+
+ if (base < limit)
+ tioce_reserve_m32(tioce_kern, base, limit);
+
+ /*
+ * prefetch mem base/limit. The tioce ppb's have 64-bit
+ * decoders, so read the upper portions w/o checking the
+ * attributes.
+ */
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_BASE, 2, &tmp);
+ base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_BASE_UPPER32, 4, &tmp);
+ base |= (u64)tmp << 32;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_MEMORY_LIMIT, 2, &tmp);
+
+ limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+ limit |= 0xfffffUL;
+
+ raw_pci_ops->read(seg, bus, PCI_DEVFN(dev, 0),
+ PCI_PREF_LIMIT_UPPER32, 4, &tmp);
+ limit |= (u64)tmp << 32;
+
+ if ((base < limit) && TIOCE_M32_ADDR(base))
+ tioce_reserve_m32(tioce_kern, base, limit);
}
return tioce_kern;
{
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
struct tioce *ce_mmr;
- uint64_t force_int_val;
+ u64 force_int_val;
if (!sn_irq_info->irq_bridge)
return;
ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+ /*
+ * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
+ * the TIO_INTx register directly (1/26/2006)
+ */
+ if (ce_common->ce_rev == TIOCE_REV_A) {
+ u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
+ u64 status;
+
+ tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
+ if (status & int_bit_mask) {
+ u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
+ u64 ctalk = sn_irq_info->irq_xtalkaddr;
+ u64 nasid, offset;
+
+ nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
+ offset = (ctalk & CTALK_NODE_OFFSET);
+ HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
+ }
+
+ return;
+ }
/*
* irq_int_bit is originally set up by prom, and holds the interrupt
default:
return;
}
- writeq(force_int_val, &ce_mmr->ce_adm_force_int);
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
}
/**
{
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
+ struct tioce_kernel *ce_kern;
struct tioce *ce_mmr;
int bit;
- uint64_t vector;
+ u64 vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+ ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
bit = sn_irq_info->irq_int_bit;
- __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
- vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
+ vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
vector |= sn_irq_info->irq_xtalkaddr;
- writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
- __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
+ tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}
static void *
tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
+ int my_nasid;
+ cnodeid_t my_cnode, mem_cnode;
struct tioce_common *tioce_common;
+ struct tioce_kernel *tioce_kern;
+ struct tioce *tioce_mmr;
/*
* Allocate kernel bus soft and copy from prom.
memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET;
- if (tioce_kern_init(tioce_common) == NULL) {
+ tioce_kern = tioce_kern_init(tioce_common);
+ if (tioce_kern == NULL) {
kfree(tioce_common);
return NULL;
}
+ /*
+ * Clear out any transient errors before registering the error
+ * interrupt handler.
+ */
+
+ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
+ ~0ULL);
+ tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, ~0ULL);
+
if (request_irq(SGI_PCIASIC_ERROR,
tioce_error_intr_handler,
SA_SHIRQ, "TIOCE error", (void *)tioce_common))
tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum);
+ /*
+ * identify closest nasid for memory allocations
+ */
+
+ my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base);
+ my_cnode = nasid_to_cnodeid(my_nasid);
+
+ if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) {
+ printk(KERN_WARNING "tioce_bus_fixup: failed to find "
+ "closest node with MEM to TIO node %d\n", my_cnode);
+ mem_cnode = (cnodeid_t)-1; /* use any node */
+ }
+
+ controller->node = mem_cnode;
+
return tioce_common;
}