<http://www.linux-mips.org/>.
config MACH_VR41XX
- bool "Support for NEC VR41XX-based machines"
+ bool "Support for NEC VR4100 series based machines"
config NEC_CMBVR4133
bool "Support for NEC CMB-VR4133"
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
- select PCI_VR41XX
config ROCKHOPPER
bool "Support for Rockhopper baseboard"
config CASIO_E55
bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
depends on MACH_VR41XX
+ select CPU_LITTLE_ENDIAN
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
config IBM_WORKPAD
bool "Support for IBM WorkPad z50"
depends on MACH_VR41XX
+ select CPU_LITTLE_ENDIAN
select DMA_NONCOHERENT
select IRQ_CPU
select ISA
-config TANBAC_TB0226
- bool "Support for TANBAC TB0226 (Mbase)"
+config TANBAC_TB022X
+ bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
depends on MACH_VR41XX
+ select CPU_LITTLE_ENDIAN
select DMA_NONCOHERENT
- select HW_HAS_PCI
select IRQ_CPU
+ select HW_HAS_PCI
help
- The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about Mbase.
+ The TANBAC VR4131 multichip module(TB0225) and
+ the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
+ manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/>
+ about VR4131 multichip module and VR4131DIMM.
-config TANBAC_TB0229
- bool "Support for TANBAC TB0229 (VR4131DIMM)"
- depends on MACH_VR41XX
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
+config TANBAC_TB0226
+ bool "Support for TANBAC Mbase(TB0226)"
+ depends on TANBAC_TB022X
+ select GPIO_VR41XX
help
- The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
- Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
+ The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
+ Please refer to <http://www.tanbac.co.jp/> about Mbase.
config VICTOR_MPC30X
bool "Support for Victor MP-C303/304"
+ depends on MACH_VR41XX
+ select CPU_LITTLE_ENDIAN
select DMA_NONCOHERENT
- select HW_HAS_PCI
select IRQ_CPU
- depends on MACH_VR41XX
+ select HW_HAS_PCI
config ZAO_CAPCELLA
bool "Support for ZAO Networks Capcella"
depends on MACH_VR41XX
+ select CPU_LITTLE_ENDIAN
select DMA_NONCOHERENT
- select HW_HAS_PCI
select IRQ_CPU
+ select HW_HAS_PCI
config PCI_VR41XX
bool "Add PCI control unit support of NEC VR4100 series"
- depends on MACH_VR41XX && PCI
-
-config VRC4171
- tristate "Add NEC VRC4171 companion chip support"
- depends on MACH_VR41XX && ISA
- ---help---
- The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
+ depends on MACH_VR41XX && HW_HAS_PCI
+ default y
+ select PCI
config VRC4173
tristate "Add NEC VRC4173 companion chip support"
depends on DDB5477
default 0
-config NEC_OSPREY
- bool "Support for NEC Osprey board"
- select DMA_NONCOHERENT
- select IRQ_CPU
+config QEMU
+ bool "Support for Qemu"
+ select DMA_COHERENT
+ select GENERIC_ISA_DMA
+ select HAVE_STD_PC_SERIAL_PORT
+ select I8259
+ select ISA
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ Qemu is a software emulator which among other architectures also
+ can simulate a MIPS32 4Kc system. This patch adds support for the
+ system architecture that currently is being simulated by Qemu. It
+ will eventually be removed again when Qemu has the capability to
+ simulate actual MIPS hardware platforms. More information on Qemu
+ can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
bool "Support for SGI IP22 (Indy/Indigo2)"
config CPU_LITTLE_ENDIAN
bool "Generate little endian code"
- default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
+ default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
help
Some MIPS machines can be configured for either little or big endian
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
default y
-config FB
- bool
- depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
- default y
- ---help---
- The frame buffer device provides an abstraction for the graphics
- hardware. It represents the frame buffer of some video hardware and
- allows application software to access the graphics hardware through
- a well-defined interface, so the software doesn't need to know
- anything about the low-level (hardware register) stuff.
-
- Frame buffer devices work identically across the different
- architectures supported by Linux and make the implementation of
- application programs easier and more portable; at this point, an X
- server exists which uses the frame buffer device exclusively.
- On several non-X86 architectures, the frame buffer device is the
- only way to use the graphics hardware.
-
- The device is accessed through special device nodes, usually located
- in the /dev directory, i.e. /dev/fb*.
-
- You need an utility program called fbset to make full use of frame
- buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
- and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
- for more information.
-
- Say Y here and to the driver for your graphics board below if you
- are compiling a kernel for a non-x86 architecture.
-
- If you are compiling for the x86 architecture, you can say Y if you
- want to play with it, but it is not essential. Please note that
- running graphical applications that directly touch the hardware
- (e.g. an accelerated X server) and that are not frame buffer
- device-aware may cause unexpected results. If unsure, say N.
-
config HAVE_STD_PC_SERIAL_PORT
bool
-config VR4181
- bool
- depends on NEC_OSPREY
- default y
-
config ARC_CONSOLE
bool "ARC console support"
depends on SGI_IP22 || SNI_RM200_PCI
endmenu
+source "net/Kconfig"
+
source "drivers/Kconfig"
source "fs/Kconfig"