#include "reg.h"
#include "dcr.h"
-/* Read the 44x memory controller to get size of system memory. */
-void ibm44x_fixup_memsize(void)
+/* Read the 4xx SDRAM controller to get size of system memory. */
+void ibm4xx_fixup_memsize(void)
{
int i;
unsigned long memsize, bank_config;
dt_fixup_memory(0, memsize);
}
-#define SPRN_DBCR0 0x134
-#define DBCR0_RST_SYSTEM 0x30000000
+/* 4xx DDR1/2 Denali memory controller support */
+/* DDR0 registers */
+#define DDR0_02 2
+#define DDR0_08 8
+#define DDR0_10 10
+#define DDR0_14 14
+#define DDR0_42 42
+#define DDR0_43 43
+
+/* DDR0_02 */
+#define DDR_START 0x1
+#define DDR_START_SHIFT 0
+#define DDR_MAX_CS_REG 0x3
+#define DDR_MAX_CS_REG_SHIFT 24
+#define DDR_MAX_COL_REG 0xf
+#define DDR_MAX_COL_REG_SHIFT 16
+#define DDR_MAX_ROW_REG 0xf
+#define DDR_MAX_ROW_REG_SHIFT 8
+/* DDR0_08 */
+#define DDR_DDR2_MODE 0x1
+#define DDR_DDR2_MODE_SHIFT 0
+/* DDR0_10 */
+#define DDR_CS_MAP 0x3
+#define DDR_CS_MAP_SHIFT 8
+/* DDR0_14 */
+#define DDR_REDUC 0x1
+#define DDR_REDUC_SHIFT 16
+/* DDR0_42 */
+#define DDR_APIN 0x7
+#define DDR_APIN_SHIFT 24
+/* DDR0_43 */
+#define DDR_COL_SZ 0x7
+#define DDR_COL_SZ_SHIFT 8
+#define DDR_BANK8 0x1
+#define DDR_BANK8_SHIFT 0
+
+#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
+
+static inline u32 mfdcr_sdram0(u32 reg)
+{
+ mtdcr(DCRN_SDRAM0_CFGADDR, reg);
+ return mfdcr(DCRN_SDRAM0_CFGDATA);
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+ u32 val, max_cs, max_col, max_row;
+ u32 cs, col, row, bank, dpath;
+ unsigned long memsize;
+
+ val = mfdcr_sdram0(DDR0_02);
+ if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+ fatal("DDR controller is not initialized\n");
+
+ /* get maximum cs col and row values */
+ max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+ max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+ max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+ /* get CS value */
+ val = mfdcr_sdram0(DDR0_10);
+
+ val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
+ cs = 0;
+ while (val) {
+ if (val && 0x1)
+ cs++;
+ val = val >> 1;
+ }
+
+ if (!cs)
+ fatal("No memory installed\n");
+ if (cs > max_cs)
+ fatal("DDR wrong CS configuration\n");
+
+ /* get data path bytes */
+ val = mfdcr_sdram0(DDR0_14);
+
+ if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
+ dpath = 8; /* 64 bits */
+ else
+ dpath = 4; /* 32 bits */
+
+ /* get adress pins (rows) */
+ val = mfdcr_sdram0(DDR0_42);
+
+ row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
+ if (row > max_row)
+ fatal("DDR wrong APIN configuration\n");
+ row = max_row - row;
+
+ /* get collomn size and banks */
+ val = mfdcr_sdram0(DDR0_43);
+
+ col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
+ if (col > max_col)
+ fatal("DDR wrong COL configuration\n");
+ col = max_col - col;
+
+ if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
+ bank = 8; /* 8 banks */
+ else
+ bank = 4; /* 4 banks */
+
+ memsize = cs * (1 << (col+row)) * bank * dpath;
+ dt_fixup_memory(0, memsize);
+}
+
+#define SPRN_DBCR0_40X 0x3F2
+#define SPRN_DBCR0_44X 0x134
+#define DBCR0_RST_SYSTEM 0x30000000
void ibm44x_dbcr_reset(void)
{
"mfspr %0,%1\n"
"oris %0,%0,%2@h\n"
"mtspr %1,%0"
- : "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM)
+ : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM)
);
}
+void ibm40x_dbcr_reset(void)
+{
+ unsigned long tmp;
+
+ asm volatile (
+ "mfspr %0,%1\n"
+ "oris %0,%0,%2@h\n"
+ "mtspr %1,%0"
+ : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM)
+ );
+}
+
+#define EMAC_RESET 0x20000000
+void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
+{
+ /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */
+ if (emac0)
+ *emac0 = EMAC_RESET;
+ if (emac1)
+ *emac1 = EMAC_RESET;
+
+ mtdcr(DCRN_MAL0_CFG, MAL_RESET);
+}
+
/* Read 4xx EBC bus bridge registers to get mappings of the peripheral
* banks into the OPB address space */
void ibm4xx_fixup_ebc_ranges(const char *ebc)
setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
}
+
+#define SPRN_CCR1 0x378
+void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+{
+ u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
+ u32 reg;
+ u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x000F0000) >> 16;
+ fwdva = tmp ? tmp : 16;
+ tmp = (reg & 0x00000700) >> 8;
+ fwdvb = tmp ? tmp : 8;
+ tmp = (reg & 0x1F000000) >> 24;
+ fbdv = tmp ? tmp : 32;
+ lfbdv = (reg & 0x0000007F);
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ opbdv0 = tmp ? tmp : 4;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x07000000) >> 24;
+ perdv0 = tmp ? tmp : 8;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x07000000) >> 24;
+ prbdv0 = tmp ? tmp : 8;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ spcid0 = tmp ? tmp : 4;
+
+ /* Calculate M */
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ if (tmp == 0) { /* PLL output */
+ tmp = (reg & 0x20000000) >> 29;
+ if (!tmp) /* PLLOUTA */
+ m = fbdv * lfbdv * fwdva;
+ else
+ m = fbdv * lfbdv * fwdvb;
+ }
+ else if (tmp == 1) /* CPU output */
+ m = fbdv * fwdva;
+ else
+ m = perdv0 * opbdv0 * fwdvb;
+
+ vco = (m * sysclk) + (m >> 1);
+ cpu = vco / fwdva;
+ plb = vco / fwdvb / prbdv0;
+ opb = plb / opbdv0;
+ ebc = plb / perdv0;
+
+ /* FIXME */
+ uart0 = ser_clk;
+
+ /* Figure out timebase. Either CPU or default TmrClk */
+ asm volatile (
+ "mfspr %0,%1\n"
+ :
+ "=&r"(reg) : "i"(SPRN_CCR1));
+ if (reg & 0x0080)
+ tb = 25000000; /* TmrClk is 25MHz */
+ else
+ tb = cpu;
+
+ dt_fixup_cpu_clocks(cpu, tb, 0);
+ dt_fixup_clock("/plb", plb);
+ dt_fixup_clock("/plb/opb", opb);
+ dt_fixup_clock("/plb/opb/ebc", ebc);
+ dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
+ dt_fixup_clock("/plb/opb/serial@ef600400", uart0);
+ dt_fixup_clock("/plb/opb/serial@ef600500", uart0);
+ dt_fixup_clock("/plb/opb/serial@ef600600", uart0);
+}
projects / karo-tx-linux.git / blobdiff