* it unique by setting a few bits in the upper byte of the
* non-static part of the address.
*/
-#define ea eth_get_dev()->enetaddr
+#define ea eth_get_ethaddr()
pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
puts ("FCC Ethernet External loopback test\n");
- eth_getenv_enetaddr("ethaddr", NetOurEther);
+ eth_getenv_enetaddr("ethaddr", net_ethaddr);
/*
* global initialisations for all FCC channels
/* 28.9 - (1-2): ioports have been set up already */
-#if defined(CONFIG_HYMOD)
- /*
- * Attention: this is board-specific
- * 0, FCC1
- * 1, FCC2
- * 2, FCC3
- */
-# define FCC_START_LOOP 0
-# define FCC_END_LOOP 2
-
- /*
- * Attention: this is board-specific
- * - FCC1 Rx-CLK is CLK10
- * - FCC1 Tx-CLK is CLK11
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- * - FCC3 Rx-CLK is CLK15
- * - FCC3 Tx-CLK is CLK16
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
- CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
- CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SACSng)
+#if defined(CONFIG_SACSng)
/*
* Attention: this is board-specific
* 1, FCC2
bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
BD_ENET_TX_LAST | BD_ENET_TX_TC;
- memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
- NetSetEther (bp, NetBcastAddr, 0x8000);
+ memset((void *)bp, patbytes[i], ELBT_BUFSZ);
+ net_set_ether(bp, net_bcast_ethaddr, 0x8000);
}
ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
* So, far we have only been given one Ethernet address. We use
* the same address for all channels
*/
-#define ea NetOurEther
- fpp->fen_paddrh = (ea[5] << 8) + ea[4];
- fpp->fen_paddrm = (ea[3] << 8) + ea[2];
- fpp->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
+ fpp->fen_paddrh = (net_ethaddr[5] << 8) + net_ethaddr[4];
+ fpp->fen_paddrm = (net_ethaddr[3] << 8) + net_ethaddr[2];
+ fpp->fen_paddrl = (net_ethaddr[1] << 8) + net_ethaddr[0];
fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
/*
&ecp->rxbufs[i][0];
ours = memcmp (ehp->et_src, \
- NetOurEther, 6);
+ net_ethaddr, 6);
prot = swap16 (ehp->et_protlen);
tb = prot & 0x8000;