[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- uint ratio[4];
+ uint i, freqCC_PLL[6], rcw_tmp;
+ uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
sysInfo->freqDDRBus = sysclk;
+#endif
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+ mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+ FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+ & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
sysInfo->freqDDRBus *= mem_pll_rat;
else
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
- for (i = 0; i < 4; i++) {
+ ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+ ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+ for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
freqCC_PLL[i] = sysclk * ratio[i];
else
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
- rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /*
+ * Each cluster has up to 4 cores, sharing the same PLL selection.
+ * The cluster assignment is fixed per SoC. There is no way identify the
+ * assignment so far, presuming the "first configuration" which is to
+ * fill the lower cluster group first before moving up to next group.
+ * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+ * and core 4~7 on cluster 2
+ * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+ * and core 12~15 on cluster 4 if existing
+ */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ if (cplx_pll > 3)
+ printf("Unsupported architecture configuration"
+ " in function %s\n", __func__);
+ cplx_pll += (cpu / 8) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#ifdef CONFIG_PPC_B4860
+#define FM1_CLK_SEL 0xe0000000
+#define FM1_CLK_SHIFT 29
+#else
+#define PME_CLK_SEL 0xe0000000
+#define PME_CLK_SHIFT 29
+#define FM1_CLK_SEL 0x1c000000
+#define FM1_CLK_SHIFT 26
+#endif
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqPME = freqCC_PLL[0];
+ break;
+ case 2:
+ sysInfo->freqPME = freqCC_PLL[0] / 2;
+ break;
+ case 3:
+ sysInfo->freqPME = freqCC_PLL[0] / 3;
+ break;
+ case 4:
+ sysInfo->freqPME = freqCC_PLL[0] / 4;
+ break;
+ case 6:
+ sysInfo->freqPME = freqCC_PLL[1] / 2;
+ break;
+ case 7:
+ sysInfo->freqPME = freqCC_PLL[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown PME clock select!\n");
+ case 0:
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ break;
+
+ }
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[0] = freqCC_PLL[3];
+ break;
+ case 2:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ break;
+ case 5:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+ break;
+ case 6:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL 0x00000038
+#define FM2_CLK_SHIFT 3
+ rcw_tmp = in_be32(&gur->rcwsr[15]);
+ switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[1] = freqCC_PLL[4];
+ break;
+ case 2:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan2 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[cpu] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
#endif
#endif
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
#endif
+
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+ uint plat_ratio, e500_ratio, half_freqSystemBus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
gd->cpu_clk = sys_info.freqProcessor[0];
gd->bus_clk = sys_info.freqSystemBus;
gd->mem_clk = sys_info.freqDDRBus;
- gd->lbc_clk = sys_info.freqLocalBus;
+ gd->arch.lbc_clk = sys_info.freqLocalBus;
#ifdef CONFIG_QE
- gd->qe_clk = sys_info.freqQE;
- gd->brg_clk = gd->qe_clk / 2;
+ gd->arch.qe_clk = sys_info.freqQE;
+ gd->arch.brg_clk = gd->arch.qe_clk / 2;
#endif
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
*/
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
- gd->i2c1_clk = sys_info.freqSystemBus;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus;
#elif defined(CONFIG_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->i2c1_clk = sys_info.freqSystemBus / 3;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
+ gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
#endif
- gd->i2c2_clk = gd->i2c1_clk;
+ gd->arch.i2c2_clk = gd->arch.i2c1_clk;
#if defined(CONFIG_FSL_ESDHC)
#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
defined(CONFIG_P1014)
- gd->sdhc_clk = gd->bus_clk;
+ gd->arch.sdhc_clk = gd->bus_clk;
#else
- gd->sdhc_clk = gd->bus_clk / 2;
+ gd->arch.sdhc_clk = gd->bus_clk / 2;
#endif
#endif /* defined(CONFIG_FSL_ESDHC) */
#if defined(CONFIG_CPM2)
- gd->vco_out = 2*sys_info.freqSystemBus;
- gd->cpm_clk = gd->vco_out / 2;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+ gd->arch.vco_out = 2*sys_info.freqSystemBus;
+ gd->arch.cpm_clk = gd->arch.vco_out / 2;
+ gd->arch.scc_clk = gd->arch.vco_out / 4;
+ gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
#endif
if(gd->cpu_clk != 0) return (0);
projects / karo-tx-uboot.git / blobdiff