Merge branch 'master' of git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / arch / powerpc / cpu / mpc8xx / fec.c

diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index d12b3df4a15ad985da1b666d714dbcc6c893417e..22b8ec752bc3bc0d8c22b288016a3faf96d83642 100644 (file)
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -205,11 +205,7 @@ static int fec_send(struct eth_device *dev, void *packet, int length)
 
        j = 0;
        while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-#if defined(CONFIG_ICU862)
-               udelay(10);
-#else
                udelay(1);
-#endif
                j++;
        }
        if (j>=TOUT_LOOP) {
@@ -424,7 +420,7 @@ static void fec_pin_init(int fecidx)
 
 #endif /* !CONFIG_RMII */
 
-#elif !defined(CONFIG_ICU862)
+#else
                /*
                 * Configure all of port D for MII.
                 */
@@ -437,42 +433,8 @@ static void fec_pin_init(int fecidx)
                        immr->im_ioport.iop_pddir = 0x1c58;     /* Pre rev. D */
                else
                        immr->im_ioport.iop_pddir = 0x1fff;     /* Rev. D and later */
-#else
-               /*
-                * Configure port A for MII.
-                */
-
-#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
-
-               /*
-                * On the ICU862 board the MII-MDC pin is routed to PD8 pin
-                * * of CPU, so for this board we need to configure Utopia and
-                * * enable PD8 to MII-MDC function
-                */
-               immr->im_ioport.iop_pdpar |= 0x4080;
 #endif
 
-               /*
-                * Has Utopia been configured?
-                */
-               if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
-                       /*
-                        * YES - Use MUXED mode for UTOPIA bus.
-                        * This frees Port A for use by MII (see 862UM table 41-6).
-                        */
-                       immr->im_ioport.utmode &= ~0x80;
-               } else {
-                       /*
-                        * NO - set SPLIT mode for UTOPIA bus.
-                        *
-                        * This doesn't really effect UTOPIA (which isn't
-                        * enabled anyway) but just tells the 862
-                        * to use port A for MII (see 862UM table 41-6).
-                        */
-                       immr->im_ioport.utmode |= 0x80;
-               }
-#endif                         /* !defined(CONFIG_ICU862) */
-
 #endif /* CONFIG_ETHER_ON_FEC1 */
        } else if (fecidx == 1) {