*-------------------------------------------------------------------------------
*/
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
+/*
+ * Startup code for IBM/AMCC PowerPC 4xx (PPC4xx) based boards
*
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
+ * The following description only applies to the NOR flash style booting.
+ * NAND booting is different. For more details about NAND booting on 4xx
+ * take a look at doc/README.nand-boot-ppc440.
*
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
+ * The CPU starts at address 0xfffffffc (last word in the address space).
+ * The U-Boot image therefore has to be located in the "upper" area of the
+ * flash (e.g. 512MiB - 0xfff80000 ... 0xffffffff). The default value for
+ * the boot chip-select (CS0) is quite big and covers this area. On the
+ * 405EX this is for example 0xffe00000 ... 0xffffffff. U-Boot will
+ * reconfigure this CS0 (and other chip-selects as well when configured
+ * this way) in the boot process to the "correct" values matching the
+ * board layout.
*/
+
+#include <asm-offsets.h>
#include <config.h>
-#include <ppc4xx.h>
+#include <asm/ppc4xx.h>
#include <timestamp.h>
#include <version.h>
# endif
#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_SIZE > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_SIZE!
#endif
/*
(0x00000000)
#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
+#if !defined(CONFIG_SYS_TLB_FOR_BOOT_FLASH)
+#define CONFIG_SYS_TLB_FOR_BOOT_FLASH 0 /* use TLB 0 as default */
+#endif
+
#define function_prolog(func_name) .text; \
.align 2; \
.globl func_name; \
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+ /* NOTREACHED - board_init_f() does not return */
#endif
-#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD)
/*
* 4xx RAM-booting U-Boot image is started from offset 0
*/
mfspr r1,SPRN_DBCR0
andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
bne skip_debug_init /* if set, don't clear debug register */
+ mfspr r1,SPRN_CCR0
+ ori r1,r1,CCR0_DTB@l /* Disable Trace Broadcast */
+ mtspr SPRN_CCR0,r1
mtspr SPRN_DBCR0,r0
mtspr SPRN_DBCR1,r0
mtspr SPRN_DBCR2,r0
/* Clear Dcache to use as RAM */
addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
- ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
+ addis r4,r0,CONFIG_SYS_INIT_RAM_SIZE@h
+ ori r4,r4,CONFIG_SYS_INIT_RAM_SIZE@l
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ran
defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460SX)
mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
lis r1, 0x0000
ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
mtdcr L2_CACHE_CFG,r1
lis r1, 0x8003
ori r1,r1, 0x0980 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || \
+ defined(CONFIG_460GT) || defined(CONFIG_APM821XX)
lis r1,0x0000 /* BAS = X_0000_0000 */
ori r1,r1,0x0984 /* first 64k */
mtdcr ISRAM0_SB0CR,r1
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_APM821XX)
lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,ISRAM1_DPC
mtdcr ISRAM1_PMEG,r1
lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
+ ori r1,r1,ISRAM1_SIZE /* ocm size */
mtdcr ISRAM1_SB0CR,r1
#endif
#elif defined(CONFIG_460SX)
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+ /* NOTREACHED - board_init_f() does not return */
#endif
#endif /* CONFIG_440 */
GET_GOT /* initialize GOT access */
bl board_init_f /* run first part of init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
#endif /* CONFIG_IOP480 */
lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+ lis r4, CONFIG_SYS_INIT_RAM_SIZE@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l
/*
* Convert the size, in bytes, to the number of cache lines/blocks
lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
- lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
- ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
+ lis r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@h
+ ori r4, r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@l
mtctr r4
lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
+ ori r2, r2, CONFIG_SYS_INIT_RAM_SIZE@l
lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- /* NEVER RETURNS! */
bl board_init_f /* run first part of init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
#endif /* CONFIG_NAND_SPL */
#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
relocate_code:
#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
+ * We need to flush the initial global data (gd_t) and bd_info
+ * before the dcache will be invalidated.
*/
/* Save registers */
mr r10, r4
mr r11, r5
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
- bl flush_dcache_range
+ /*
+ * Flush complete dcache, this is faster than flushing the
+ * ranges for global_data and bd_info instead.
+ */
+ bl flush_dcache
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+ lis r4, CONFIG_SYS_INIT_RAM_SIZE@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l
add r4, r4, r3
bl invalidate_dcache_range
mtspr SPRN_DTV3,r6
msync
isync
+
+ /* Invalidate data cache, now no longer our stack */
+ dccci 0,0
+ sync
+ isync
#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
*/
- iccci 0,0 /* Invalidate inst cache */
- dccci 0,0 /* Invalidate data cache, now no longer our stack */
- sync
- isync
-
+#if defined(CONFIG_440)
/* Clear all potential pending exceptions */
mfspr r1,SPRN_MCSR
mtspr SPRN_MCSR,r1
-#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
-#else
- addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
tlbre r0,r1,0x0002 /* Read contents */
ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
tlbwe r0,r1,0x0002 /* Save it out */
sync
isync
-#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
+#endif /* defined(CONFIG_440) */
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Init Data pointer */
mr r10, r5 /* Save copy of Destination Address */
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
+ cmpwi r0,0
add r0,r0,r11
- stw r10,0(r3)
+ stw r4,0(r3)
+ beq- 5f
stw r0,0(r4)
- bdnz 3b
+5: bdnz 3b
4:
clear_bss:
/*
projects / karo-tx-uboot.git / blobdiff