mflr r0
bl 1f
1: mflr r3
- LOADADDR(r4,1b)
+ LOAD_REG_IMMEDIATE(r4,1b)
subf r3,r4,r3
mtlr r0
blr
mflr r0
bl 1f
1: mflr r5
- LOADADDR(r4,1b)
+ LOAD_REG_IMMEDIATE(r4,1b)
subf r5,r4,r5
add r3,r3,r5
mtlr r0
mtlr r0
blr
-_GLOBAL(call_handle_IRQ_event)
+_GLOBAL(call___do_IRQ)
mflr r0
std r0,16(r1)
- stdu r1,THREAD_SIZE-112(r6)
- mr r1,r6
- bl .handle_IRQ_event
+ stdu r1,THREAD_SIZE-112(r5)
+ mr r1,r5
+ bl .__do_IRQ
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
sub r0,r3,r5
std r0,0(r4)
ld r4,CPU_SPEC_SETUP(r3)
+ cmpdi 0,r4,0
add r4,r4,r5
+ beqlr
ld r4,0(r4)
add r4,r4,r5
mtctr r4
*/
_GLOBAL(do_cpu_ftr_fixups)
/* Get CPU 0 features */
- LOADADDR(r6,cur_cpu_spec)
+ LOAD_REG_IMMEDIATE(r6,cur_cpu_spec)
sub r6,r6,r3
ld r4,0(r6)
sub r4,r4,r3
ld r4,CPU_SPEC_FEATURES(r4)
/* Get the fixup table */
- LOADADDR(r6,__start___ftr_fixup)
+ LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup)
sub r6,r6,r3
- LOADADDR(r7,__stop___ftr_fixup)
+ LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup)
sub r7,r7,r3
/* Do the fixup */
1: cmpld r6,r7
blr
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
+/*
+ * SCOM access functions for 970 (FX only for now)
+ *
+ * unsigned long scom970_read(unsigned int address);
+ * void scom970_write(unsigned int address, unsigned long value);
+ *
+ * The address passed in is the 24 bits register address. This code
+ * is 970 specific and will not check the status bits, so you should
+ * know what you are doing.
+ */
+_GLOBAL(scom970_read)
+ /* interrupts off */
+ mfmsr r4
+ ori r0,r4,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd,
+ * and finally or in RW bit
+ */
+ rlwinm r3,r3,8,0,15
+ ori r3,r3,0x8000
+
+ /* do the actual scom read */
+ sync
+ mtspr SPRN_SCOMC,r3
+ isync
+ mfspr r3,SPRN_SCOMD
+ isync
+ mfspr r0,SPRN_SCOMC
+ isync
+
+ /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
+ * that's the best we can do). Not implemented yet as we don't use
+ * the scom on any of the bogus CPUs yet, but may have to be done
+ * ultimately
+ */
+
+ /* restore interrupts */
+ mtmsrd r4,1
+ blr
+
+
+_GLOBAL(scom970_write)
+ /* interrupts off */
+ mfmsr r5
+ ori r0,r5,MSR_EE
+ xori r0,r0,MSR_EE
+ mtmsrd r0,1
+
+ /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
+ * (including parity). On current CPUs they must be 0'd.
+ */
+
+ rlwinm r3,r3,8,0,15
+
+ sync
+ mtspr SPRN_SCOMD,r4 /* write data */
+ isync
+ mtspr SPRN_SCOMC,r3 /* write command */
+ isync
+ mfspr 3,SPRN_SCOMC
+ isync
+
+ /* restore interrupts */
+ mtmsrd r5,1
+ blr
+
+
/*
* Create a kernel thread
* kernel_thread(fn, arg, flags)
#endif /* CONFIG_ALTIVEC */
-_GLOBAL(__setup_cpu_power3)
- blr
-
_GLOBAL(execve)
li r0,__NR_execve
sc