void pcibios_make_OF_bus_map(void);
static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
-#endif
/* By default, we don't re-assign bus numbers. We do this only on
* some pmacs
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
-#ifdef CONFIG_PPC_OF
/*
* Functions below are used on OpenFirmware machines.
*/
}
}
-#else /* CONFIG_PPC_OF */
-void pcibios_make_OF_bus_map(void)
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
{
-}
-#endif /* CONFIG_PPC_OF */
-
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
-{
- struct pci_bus *bus;
- struct device_node *node = hose->dn;
unsigned long io_offset;
struct resource *res = &hose->io_resource;
- pr_debug("PCI: Scanning PHB %s\n",
- node ? node->full_name : "<NO NAME>");
-
- /* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
- if (bus == NULL) {
- printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
- hose->global_number);
- return;
- }
- bus->secondary = hose->first_busno;
- hose->bus = bus;
-
/* Fixup IO space offset */
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
res->start = (res->start + io_offset) & 0xffffffffu;
res->end = (res->end + io_offset) & 0xffffffffu;
-
- /* Wire up PHB bus resources */
- pcibios_setup_phb_resources(hose);
-
- /* Scan children */
- hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
- pcibios_scan_phb(hose);
+ pcibios_scan_phb(hose, hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
return result;
}
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type) \
-static int \
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
-{ \
- return PCIBIOS_DEVICE_NOT_FOUND; \
-}
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 *val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 val)
-{
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
- .read = null_read_config,
- .write = null_write_config,
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
- static struct pci_bus bus;
-
- if (hose == 0) {
- hose = pci_bus_to_hose(busnr);
- if (hose == 0)
- printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
- }
- bus.number = busnr;
- bus.sysdata = hose;
- bus.ops = hose? hose->ops: &null_pci_ops;
- return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
- int devfn, int offset, type value) \
-{ \
- return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
- devfn, offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
- int cap)
-{
- return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}