#include <linux/linux_logo.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
+#include <asm/spu_csa.h>
#include <asm/xmon.h>
#include <asm/prom.h>
struct cbe_spu_info cbe_spu_info[MAX_NUMNODES];
EXPORT_SYMBOL_GPL(cbe_spu_info);
+/*
+ * The spufs fault-handling code needs to call force_sig_info to raise signals
+ * on DMA errors. Export it here to avoid general kernel-wide access to this
+ * function
+ */
+EXPORT_SYMBOL_GPL(force_sig_info);
+
/*
* Protects cbe_spu_info and spu->number.
*/
static DEFINE_SPINLOCK(spu_full_list_lock);
static DEFINE_MUTEX(spu_full_list_mutex);
+struct spu_slb {
+ u64 esid, vsid;
+};
+
void spu_invalidate_slbs(struct spu *spu)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
}
EXPORT_SYMBOL_GPL(spu_associate_mm);
+int spu_64k_pages_available(void)
+{
+ return mmu_psize_defs[MMU_PAGE_64K].shift != 0;
+}
+EXPORT_SYMBOL_GPL(spu_64k_pages_available);
+
static int __spu_trap_invalid_dma(struct spu *spu)
{
pr_debug("%s\n", __FUNCTION__);
out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
}
-static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
+static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+ pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+ __func__, slbe, slb->vsid, slb->esid);
+
+ out_be64(&priv2->slb_index_W, slbe);
+ out_be64(&priv2->slb_vsid_RW, slb->vsid);
+ out_be64(&priv2->slb_esid_RW, slb->esid);
+}
+
+static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
+{
struct mm_struct *mm = spu->mm;
- u64 esid, vsid, llp;
+ struct spu_slb slb;
int psize;
pr_debug("%s\n", __FUNCTION__);
printk("%s: invalid access during switch!\n", __func__);
return 1;
}
- esid = (ea & ESID_MASK) | SLB_ESID_V;
+ slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
switch(REGION_ID(ea)) {
case USER_REGION_ID:
#else
psize = mm->context.user_psize;
#endif
- vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
- SLB_VSID_USER;
+ slb.vsid = (get_vsid(mm->context.id, ea, MMU_SEGSIZE_256M)
+ << SLB_VSID_SHIFT) | SLB_VSID_USER;
break;
case VMALLOC_REGION_ID:
if (ea < VMALLOC_END)
psize = mmu_vmalloc_psize;
else
psize = mmu_io_psize;
- vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
- SLB_VSID_KERNEL;
+ slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
+ << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
case KERNEL_REGION_ID:
psize = mmu_linear_psize;
- vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
- SLB_VSID_KERNEL;
+ slb.vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M)
+ << SLB_VSID_SHIFT) | SLB_VSID_KERNEL;
break;
default:
/* Future: support kernel segments so that drivers
pr_debug("invalid region access at %016lx\n", ea);
return 1;
}
- llp = mmu_psize_defs[psize].sllp;
+ slb.vsid |= mmu_psize_defs[psize].sllp;
- out_be64(&priv2->slb_index_W, spu->slb_replace);
- out_be64(&priv2->slb_vsid_RW, vsid | llp);
- out_be64(&priv2->slb_esid_RW, esid);
+ spu_load_slb(spu, spu->slb_replace, &slb);
spu->slb_replace++;
if (spu->slb_replace >= 8)
return 0;
}
+static void __spu_kernel_slb(void *addr, struct spu_slb *slb)
+{
+ unsigned long ea = (unsigned long)addr;
+ u64 llp;
+
+ if (REGION_ID(ea) == KERNEL_REGION_ID)
+ llp = mmu_psize_defs[mmu_linear_psize].sllp;
+ else
+ llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+
+ slb->vsid = (get_kernel_vsid(ea, MMU_SEGSIZE_256M) << SLB_VSID_SHIFT) |
+ SLB_VSID_KERNEL | llp;
+ slb->esid = (ea & ESID_MASK) | SLB_ESID_V;
+}
+
+/**
+ * Given an array of @nr_slbs SLB entries, @slbs, return non-zero if the
+ * address @new_addr is present.
+ */
+static inline int __slb_present(struct spu_slb *slbs, int nr_slbs,
+ void *new_addr)
+{
+ unsigned long ea = (unsigned long)new_addr;
+ int i;
+
+ for (i = 0; i < nr_slbs; i++)
+ if (!((slbs[i].esid ^ ea) & ESID_MASK))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * Setup the SPU kernel SLBs, in preparation for a context save/restore. We
+ * need to map both the context save area, and the save/restore code.
+ *
+ * Because the lscsa and code may cross segment boundaires, we check to see
+ * if mappings are required for the start and end of each range. We currently
+ * assume that the mappings are smaller that one segment - if not, something
+ * is seriously wrong.
+ */
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+ void *code, int code_size)
+{
+ struct spu_slb slbs[4];
+ int i, nr_slbs = 0;
+ /* start and end addresses of both mappings */
+ void *addrs[] = {
+ lscsa, (void *)lscsa + sizeof(*lscsa) - 1,
+ code, code + code_size - 1
+ };
+
+ /* check the set of addresses, and create a new entry in the slbs array
+ * if there isn't already a SLB for that address */
+ for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+ if (__slb_present(slbs, nr_slbs, addrs[i]))
+ continue;
+
+ __spu_kernel_slb(addrs[i], &slbs[nr_slbs]);
+ nr_slbs++;
+ }
+
+ /* Add the set of SLBs */
+ for (i = 0; i < nr_slbs; i++)
+ spu_load_slb(spu, i, &slbs[i]);
+}
+EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
+
static irqreturn_t
spu_irq_class_0(int irq, void *data)
{
int spu_add_sysdev_attr_group(struct attribute_group *attrs)
{
struct spu *spu;
+ int rc = 0;
mutex_lock(&spu_full_list_mutex);
- list_for_each_entry(spu, &spu_full_list, full_list)
- sysfs_create_group(&spu->sysdev.kobj, attrs);
+ list_for_each_entry(spu, &spu_full_list, full_list) {
+ rc = sysfs_create_group(&spu->sysdev.kobj, attrs);
+
+ /* we're in trouble here, but try unwinding anyway */
+ if (rc) {
+ printk(KERN_ERR "%s: can't create sysfs group '%s'\n",
+ __func__, attrs->name);
+
+ list_for_each_entry_continue_reverse(spu,
+ &spu_full_list, full_list)
+ sysfs_remove_group(&spu->sysdev.kobj, attrs);
+ break;
+ }
+ }
+
mutex_unlock(&spu_full_list_mutex);
- return 0;
+ return rc;
}
EXPORT_SYMBOL_GPL(spu_add_sysdev_attr_group);