#include <linux/usb/r8a66597.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/mfd/sh_mobile_sdhi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
+#include <media/tw9910.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
-#include <asm/sh_keysc.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
.irq = IRQ0,
};
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
/* SHDI0 */
static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{
},
};
+#else
+
+static int mmc_spi_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PTY6);
+}
+
+static int mmc_spi_get_cd(struct device *dev)
+{
+ return !gpio_get_value(GPIO_PTY7);
+}
+
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+ gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+ .get_ro = mmc_spi_get_ro,
+ .get_cd = mmc_spi_get_cd,
+ .caps = MMC_CAP_NEEDS_POLL,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+ .setpower = mmc_spi_setpower,
+};
+
+static struct spi_board_info spi_bus[] = {
+ {
+ .modalias = "mmc_spi",
+ .platform_data = &mmc_spi_info,
+ .max_speed_hz = 5000000,
+ .mode = SPI_MODE_0,
+ .controller_data = (void *) GPIO_PTM4,
+ },
+};
+
+static struct sh_msiof_spi_info msiof0_data = {
+ .num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+ [0] = {
+ .name = "MSIOF0",
+ .start = 0xa4c40000,
+ .end = 0xa4c40063,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 84,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msiof0_device = {
+ .name = "spi_sh_msiof",
+ .id = 0, /* MSIOF0 */
+ .dev = {
+ .platform_data = &msiof0_data,
+ },
+ .num_resources = ARRAY_SIZE(msiof0_resources),
+ .resource = msiof0_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_MSIOF0,
+ },
+};
+
+#endif
+
+/* I2C Video */
+static struct i2c_board_info i2c_camera[] = {
+ {
+ I2C_BOARD_INFO("tw9910", 0x45),
+ },
+};
+
+/* tw9910 */
+static int tw9910_power(struct device *dev, int mode)
+{
+ int val = mode ? 0 : 1;
+
+ gpio_set_value(GPIO_PTU2, val);
+ if (mode)
+ mdelay(100);
+
+ return 0;
+}
+
+static struct tw9910_video_info tw9910_info = {
+ .buswidth = SOCAM_DATAWIDTH_8,
+ .mpout = TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+ .i2c_adapter_id = 0,
+ .bus_id = 1,
+ .power = tw9910_power,
+ .board_info = &i2c_camera[0],
+ .module_name = "tw9910",
+ .priv = &tw9910_info,
+};
+
+
+static struct platform_device camera_devices[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &tw9910_link,
+ },
+ },
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
&ceu0_device,
&ceu1_device,
&keysc_device,
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
&sdhi0_device,
&sdhi1_device,
+#else
+ &msiof0_device,
+#endif
+ &camera_devices[0],
};
#define EEPROM_ADDR 0x50
gpio_direction_output(GPIO_PTR1, 0);
gpio_direction_output(GPIO_PTA2, 0);
- /* I/O buffer drive ability is low */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+ /* I/O buffer drive ability is high */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
gpio_direction_input(GPIO_PTR5);
gpio_direction_input(GPIO_PTR6);
- /* enable SDHI0 (needs DS2.4 set to ON) */
+#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+ /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
gpio_request(GPIO_FN_SDHI0CD, NULL);
gpio_request(GPIO_FN_SDHI0WP, NULL);
gpio_request(GPIO_FN_SDHI0CMD, NULL);
gpio_request(GPIO_PTB6, NULL);
gpio_direction_output(GPIO_PTB6, 0);
- /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
+ /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
gpio_request(GPIO_FN_SDHI1CD, NULL);
gpio_request(GPIO_FN_SDHI1WP, NULL);
gpio_request(GPIO_FN_SDHI1CMD, NULL);
/* I/O buffer drive ability is high for SDHI1 */
ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#else
+ /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+ gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+ gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+ gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+ gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
+ gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
+ gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+ gpio_request(GPIO_PTY6, NULL); /* write protect */
+ gpio_direction_input(GPIO_PTY6);
+ gpio_request(GPIO_PTY7, NULL); /* card detect */
+ gpio_direction_input(GPIO_PTY7);
+
+ spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+ /* enable Video */
+ gpio_request(GPIO_PTU2, NULL);
+ gpio_direction_output(GPIO_PTU2, 1);
/* enable I2C device */
i2c_register_board_info(1, i2c1_devices,