return count;
}
-static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id)
{
unsigned long timer_status;
/* Do timer tick */
write_seqlock(&xtime_lock);
- handle_timer_tick(regs);
+ handle_timer_tick();
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
static struct irqaction mtu2_irq = {
.name = "timer",
.handler = mtu2_timer_interrupt,
- .flags = SA_INTERRUPT,
+ .flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
-/*
- * Hah! We'll see if this works (switching from usecs to nsecs).
- */
-static unsigned long mtu2_timer_get_frequency(void)
-{
- u32 freq;
- struct timespec ts1, ts2;
- unsigned long diff_nsec;
- unsigned long factor;
-
- /* Setup the timer: We don't want to generate interrupts, just
- * have it count down at its natural rate.
- */
-
- ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR);
- ctrl_outb(MTU2_TCR_CALIB, MTU2_TCR_1);
- ctrl_outb(ctrl_inb(MTU2_TIER_1) & ~MTU2_TIER_TGIEA, MTU2_TIER_1);
- ctrl_outw(0, MTU2_TCNT_1);
-
- rtc_get_time(&ts2);
-
- do {
- rtc_get_time(&ts1);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- /* actually start the timer */
- ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR);
-
- do {
- rtc_get_time(&ts2);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- freq = ctrl_inw(MTU2_TCNT_0);
- if (ts2.tv_nsec < ts1.tv_nsec) {
- ts2.tv_nsec += 1000000000;
- ts2.tv_sec--;
- }
-
- diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
-
- /* this should work well if the RTC has a precision of n Hz, where
- * n is an integer. I don't think we have to worry about the other
- * cases. */
- factor = (1000000000 + diff_nsec/2) / diff_nsec;
-
- if (factor * diff_nsec > 1100000000 ||
- factor * diff_nsec < 900000000)
- panic("weird RTC (diff_nsec %ld)", diff_nsec);
-
- return freq * factor;
-}
-
static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 };
static void mtu2_clk_init(struct clk *clk)
.init = mtu2_timer_init,
.start = mtu2_timer_start,
.stop = mtu2_timer_stop,
- .get_frequency = mtu2_timer_get_frequency,
+#ifndef CONFIG_GENERIC_TIME
.get_offset = mtu2_timer_get_offset,
+#endif
};
struct sys_timer mtu2_timer = {