#include <linux/pci.h> /* struct pci_dev */
#include <linux/proc_fs.h>
#include <linux/scatterlist.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/vaddrs.h>
#include <asm/oplib.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/sbus.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/dma.h>
+#include <asm/iommu.h>
+#include <asm/io-unit.h>
+
+#include "dma.h"
#define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */
}
}
-/*
- */
-void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset,
- unsigned long size, char *name)
-{
- return _sparc_alloc_io(phyres->flags & 0xF,
- phyres->start + offset, size, name);
-}
-
void __iomem *of_ioremap(struct resource *res, unsigned long offset,
unsigned long size, char *name)
{
}
EXPORT_SYMBOL(of_iounmap);
-/*
- */
-void sbus_iounmap(volatile void __iomem *addr, unsigned long size)
-{
- iounmap(addr);
-}
-
/*
* Meat of mapping
*/
#ifdef CONFIG_SBUS
-void sbus_set_sbus64(struct sbus_dev *sdev, int x)
+void sbus_set_sbus64(struct device *dev, int x)
{
printk("sbus_set_sbus64: unsupported\n");
}
-extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq);
-void __init sbus_fill_device_irq(struct sbus_dev *sdev)
-{
- struct linux_prom_irqs irqs[PROMINTR_MAX];
- int len;
-
- len = prom_getproperty(sdev->prom_node, "intr",
- (char *)irqs, sizeof(irqs));
- if (len != -1) {
- sdev->num_irqs = len / 8;
- if (sdev->num_irqs == 0) {
- sdev->irqs[0] = 0;
- } else if (sparc_cpu_model == sun4d) {
- for (len = 0; len < sdev->num_irqs; len++)
- sdev->irqs[len] =
- sun4d_build_irq(sdev, irqs[len].pri);
- } else {
- for (len = 0; len < sdev->num_irqs; len++)
- sdev->irqs[len] = irqs[len].pri;
- }
- } else {
- int interrupts[PROMINTR_MAX];
-
- /* No "intr" node found-- check for "interrupts" node.
- * This node contains SBus interrupt levels, not IPLs
- * as in "intr", and no vector values. We convert
- * SBus interrupt levels to PILs (platform specific).
- */
- len = prom_getproperty(sdev->prom_node, "interrupts",
- (char *)interrupts, sizeof(interrupts));
- if (len == -1) {
- sdev->irqs[0] = 0;
- sdev->num_irqs = 0;
- } else {
- sdev->num_irqs = len / sizeof(int);
- for (len = 0; len < sdev->num_irqs; len++) {
- sdev->irqs[len] =
- sbint_to_irq(sdev, interrupts[len]);
- }
- }
- }
-}
-
/*
* Allocate a chunk of memory suitable for DMA.
* Typically devices use them for control blocks.
* CPU may access them without any explicit flushing.
- *
- * XXX Some clever people know that sdev is not used and supply NULL. Watch.
*/
-void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
+void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
{
+ struct of_device *op = to_of_device(dev);
unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
unsigned long va;
struct resource *res;
* XXX That's where sdev would be used. Currently we load
* all iommu tables with the same translations.
*/
- if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
+ if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0)
goto err_noiommu;
- /* Set the resource name, if known. */
- if (sdev) {
- res->name = sdev->prom_name;
- }
+ res->name = op->node->name;
return (void *)(unsigned long)res->start;
return NULL;
}
-void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba)
+void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
{
struct resource *res;
struct page *pgv;
kfree(res);
/* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */
- pgv = mmu_translate_dvma(ba);
- mmu_unmap_dma_area(ba, n);
+ pgv = virt_to_page(p);
+ mmu_unmap_dma_area(dev, ba, n);
__free_pages(pgv, get_order(n));
}
* CPU view of this memory may be inconsistent with
* a device view and explicit flushing is necessary.
*/
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
{
/* XXX why are some lengths signed, others unsigned? */
if (len <= 0) {
if (len > 256*1024) { /* __get_free_pages() limit */
return 0;
}
- return mmu_get_scsi_one(va, len, sdev->bus);
+ return mmu_get_scsi_one(dev, va, len);
}
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
{
- mmu_release_scsi_one(ba, n, sdev->bus);
+ mmu_release_scsi_one(dev, ba, n);
}
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
{
- mmu_get_scsi_sgl(sg, n, sdev->bus);
+ mmu_get_scsi_sgl(dev, sg, n);
/*
* XXX sparc64 can return a partial length here. sun4c should do this
return n;
}
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
-{
- mmu_release_scsi_sgl(sg, n, sdev->bus);
-}
-
-/*
- */
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
-{
-#if 0
- unsigned long va;
- struct resource *res;
-
- /* We do not need the resource, just print a message if invalid. */
- res = _sparc_find_resource(&_sparc_dvma, ba);
- if (res == NULL)
- panic("sbus_dma_sync_single: 0x%x\n", ba);
-
- va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
- /*
- * XXX This bogosity will be fixed with the iommu rewrite coming soon
- * to a kernel near you. - Anton
- */
- /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
-}
-
-void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction)
+void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
{
-#if 0
- unsigned long va;
- struct resource *res;
-
- /* We do not need the resource, just print a message if invalid. */
- res = _sparc_find_resource(&_sparc_dvma, ba);
- if (res == NULL)
- panic("sbus_dma_sync_single: 0x%x\n", ba);
-
- va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */
- /*
- * XXX This bogosity will be fixed with the iommu rewrite coming soon
- * to a kernel near you. - Anton
- */
- /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */
-#endif
+ mmu_release_scsi_sgl(dev, sg, n);
}
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
{
- printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n");
}
-void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction)
+void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
{
- printk("sbus_dma_sync_sg_for_device: not implemented yet\n");
-}
-
-/* Support code for sbus_init(). */
-/*
- * XXX This functions appears to be a distorted version of
- * prom_sbus_ranges_init(), with all sun4d stuff cut away.
- * Ask DaveM what is going on here, how is sun4d supposed to work... XXX
- */
-/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */
-void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus)
-{
- int parent_node = pn->node;
-
- if (sparc_cpu_model == sun4d) {
- struct linux_prom_ranges iounit_ranges[PROMREG_MAX];
- int num_iounit_ranges, len;
-
- len = prom_getproperty(parent_node, "ranges",
- (char *) iounit_ranges,
- sizeof (iounit_ranges));
- if (len != -1) {
- num_iounit_ranges =
- (len / sizeof(struct linux_prom_ranges));
- prom_adjust_ranges(sbus->sbus_ranges,
- sbus->num_sbus_ranges,
- iounit_ranges, num_iounit_ranges);
- }
- }
}
-void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp)
-{
-#ifndef CONFIG_SUN4
- struct device_node *parent = dp->parent;
-
- if (sparc_cpu_model != sun4d &&
- parent != NULL &&
- !strcmp(parent->name, "iommu")) {
- extern void iommu_init(int iommu_node, struct sbus_bus *sbus);
-
- iommu_init(parent->node, sbus);
- }
-
- if (sparc_cpu_model == sun4d) {
- extern void iounit_init(int sbi_node, int iounit_node,
- struct sbus_bus *sbus);
-
- iounit_init(dp->node, parent->node, sbus);
- }
-#endif
-}
-
-void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
-{
- if (sparc_cpu_model == sun4d) {
- struct device_node *parent = dp->parent;
-
- sbus->devid = of_getintprop_default(parent, "device-id", 0);
- sbus->board = of_getintprop_default(parent, "board#", 0);
- }
-}
-
-int __init sbus_arch_preinit(void)
+static int __init sparc_register_ioport(void)
{
register_proc_sparc_ioport();
-#ifdef CONFIG_SUN4
- {
- extern void sun4_dvma_init(void);
- sun4_dvma_init();
- }
- return 1;
-#else
return 0;
-#endif
}
-void __init sbus_arch_postinit(void)
-{
- if (sparc_cpu_model == sun4d) {
- extern void sun4d_init_sbi_irq(void);
- sun4d_init_sbi_irq();
- }
-}
+arch_initcall(sparc_register_ioport);
+
#endif /* CONFIG_SBUS */
#ifdef CONFIG_PCI
projects / karo-tx-linux.git / blobdiff