gcc-4.6: mm: fix unused but set warnings

[mv-sheeva.git] / arch / x86 / boot / tty.c

diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index f6d52e65f97aad3cb212f3cb4a4b7c88a59f8a39..def2451f46aefe70fe38d5ed3554a380f710a6e2 100644 (file)
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -15,27 +15,12 @@
 
 #include "boot.h"
 
-#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */
-
-static int     early_serial_base;
+int early_serial_base;
 
 #define XMTRDY          0x20
 
-#define DLAB           0x80
-
 #define TXR             0       /*  Transmit register (WRITE) */
-#define RXR             0       /*  Receive register  (READ)  */
-#define IER             1       /*  Interrupt Enable          */
-#define IIR             2       /*  Interrupt ID              */
-#define FCR             2       /*  FIFO control              */
-#define LCR             3       /*  Line control              */
-#define MCR             4       /*  Modem control             */
 #define LSR             5       /*  Line Status               */
-#define MSR             6       /*  Modem Status              */
-#define DLL             0       /*  Divisor Latch Low         */
-#define DLH             1       /*  Divisor latch High        */
-
-#define DEFAULT_BAUD 9600
 
 /*
  * These functions are in .inittext so they can be used to signal
@@ -152,119 +137,3 @@ int getchar_timeout(void)
        return 0;               /* Timeout! */
 }
 
-static void early_serial_init(int baud)
-{
-       unsigned char c;
-       unsigned divisor;
-
-       outb(0x3, early_serial_base + LCR);     /* 8n1 */
-       outb(0, early_serial_base + IER);       /* no interrupt */
-       outb(0, early_serial_base + FCR);       /* no fifo */
-       outb(0x3, early_serial_base + MCR);     /* DTR + RTS */
-
-       divisor = 115200 / baud;
-       c = inb(early_serial_base + LCR);
-       outb(c | DLAB, early_serial_base + LCR);
-       outb(divisor & 0xff, early_serial_base + DLL);
-       outb((divisor >> 8) & 0xff, early_serial_base + DLH);
-       outb(c & ~DLAB, early_serial_base + LCR);
-}
-
-static int parse_earlyprintk(void)
-{
-       int baud = DEFAULT_BAUD;
-       char arg[32];
-       int pos = 0;
-
-       if (cmdline_find_option("earlyprintk", arg, sizeof arg) > 0) {
-               char *e;
-
-               if (!strncmp(arg, "serial", 6)) {
-                       early_serial_base = DEFAULT_SERIAL_PORT;
-                       pos += 6;
-               }
-
-               if (arg[pos] == ',')
-                       pos++;
-
-               if (!strncmp(arg, "ttyS", 4)) {
-                       static const int bases[] = { 0x3f8, 0x2f8 };
-                       int port = 0;
-
-                       if (!strncmp(arg + pos, "ttyS", 4))
-                               pos += 4;
-
-                       if (arg[pos++] == '1')
-                               port = 1;
-
-                       early_serial_base = bases[port];
-               }
-
-               if (arg[pos] == ',')
-                       pos++;
-
-               baud = simple_strtoull(arg + pos, &e, 0);
-               if (baud == 0 || arg + pos == e)
-                       baud = DEFAULT_BAUD;
-       }
-
-       return baud;
-}
-
-#define BASE_BAUD (1843200/16)
-static unsigned int probe_baud(int port)
-{
-       unsigned char lcr, dll, dlh;
-       unsigned int quot;
-
-       lcr = inb(port + LCR);
-       outb(lcr | DLAB, port + LCR);
-       dll = inb(port + DLL);
-       dlh = inb(port + DLH);
-       outb(lcr, port + LCR);
-       quot = (dlh << 8) | dll;
-
-       return BASE_BAUD / quot;
-}
-
-static int parse_console_uart8250(void)
-{
-       char optstr[64], *options;
-       int baud = DEFAULT_BAUD;
-
-       /*
-        * console=uart8250,io,0x3f8,115200n8
-        * need to make sure it is last one console !
-        */
-       if (cmdline_find_option("console", optstr, sizeof optstr) <= 0)
-               return baud;
-
-       options = optstr;
-
-       if (!strncmp(options, "uart8250,io,", 12))
-               early_serial_base = simple_strtoull(options + 12, &options, 0);
-       else if (!strncmp(options, "uart,io,", 8))
-               early_serial_base = simple_strtoull(options + 8, &options, 0);
-       else
-               return baud;
-
-       if (options && (options[0] == ','))
-               baud = simple_strtoull(options + 1, &options, 0);
-       else
-               baud = probe_baud(early_serial_base);
-
-       return baud;
-}
-
-void console_init(void)
-{
-       int baud;
-
-       baud = parse_earlyprintk();
-
-       if (!early_serial_base)
-               baud = parse_console_uart8250();
-
-       if (early_serial_base != 0)
-               early_serial_init(baud);
-}