/*
* The default interrupt routing model is PIC (8259). This gets
- * overriden if IOAPICs are enumerated (below).
+ * overridden if IOAPICs are enumerated (below).
*/
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
#ifdef CONFIG_X86_64
/* rely on all ACPI tables being in the direct mapping */
-char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
{
if (!phys_addr || !size)
return NULL;
* from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
* count idx down while incrementing the phys address.
*/
-char *__acpi_map_table(unsigned long phys, unsigned long size)
+char *__init __acpi_map_table(unsigned long phys, unsigned long size)
{
unsigned long base, offset, mapped_size;
int idx;
*
* Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
* for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
- * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
- * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
*/
void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
old = inb(0x4d0) | (inb(0x4d1) << 8);
/*
- * If we use ACPI to set PCI irq's, then we should clear ELCR
+ * If we use ACPI to set PCI IRQs, then we should clear ELCR
* since we will set it correctly as we enable the PCI irq
* routing.
*/
* ACPI based hotplug support for CPU
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
-int acpi_map_lsapic(acpi_handle handle, int *pcpu)
+
+static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
return 0;
}
+/* wrapper to silence section mismatch warning */
+int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+ return _acpi_map_lsapic(handle, pcpu);
+}
EXPORT_SYMBOL(acpi_map_lsapic);
int acpi_unmap_lsapic(int cpu)
{
- x86_cpu_to_apicid[cpu] = -1;
+ per_cpu(x86_cpu_to_apicid, cpu) = -1;
cpu_clear(cpu, cpu_present_map);
num_processors--;
EXPORT_SYMBOL(acpi_unregister_ioapic);
-static unsigned long __init
-acpi_scan_rsdp(unsigned long start, unsigned long length)
-{
- unsigned long offset = 0;
- unsigned long sig_len = sizeof("RSD PTR ") - 1;
-
- /*
- * Scan all 16-byte boundaries of the physical memory region for the
- * RSDP signature.
- */
- for (offset = 0; offset < length; offset += 16) {
- if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len))
- continue;
- return (start + offset);
- }
-
- return 0;
-}
-
static int __init acpi_parse_sbf(struct acpi_table_header *table)
{
struct acpi_table_boot *sb;
}
hpet_address = hpet_tbl->address.address;
+
+ /*
+ * Some broken BIOSes advertise HPET at 0x0. We really do not
+ * want to allocate a resource there.
+ */
+ if (!hpet_address) {
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: %#lx is invalid\n",
+ hpet_tbl->id, hpet_address);
+ return 0;
+ }
+#ifdef CONFIG_X86_64
+ /*
+ * Some even more broken BIOSes advertise HPET at
+ * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+ * some noise:
+ */
+ if (hpet_address == 0xfed0000000000000UL) {
+ if (!hpet_force_user) {
+ printk(KERN_WARNING PREFIX "HPET id: %#x "
+ "base: 0xfed0000000000000 is bogus\n "
+ "try hpet=force on the kernel command line to "
+ "fix it up to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address = 0;
+ return 0;
+ }
+ printk(KERN_WARNING PREFIX
+ "HPET id: %#x base: 0xfed0000000000000 fixed up "
+ "to 0xfed00000.\n", hpet_tbl->id);
+ hpet_address >>= 32;
+ }
+#endif
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, hpet_address);
return 0;
}
-unsigned long __init acpi_find_rsdp(void)
-{
- unsigned long rsdp_phys = 0;
-
- if (efi_enabled) {
- if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
- return efi.acpi20;
- else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
- return efi.acpi;
- }
- /*
- * Scan memory looking for the RSDP signature. First search EBDA (low
- * memory) paragraphs and then search upper memory (E0000-FFFFF).
- */
- rsdp_phys = acpi_scan_rsdp(0, 0x400);
- if (!rsdp_phys)
- rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000);
-
- return rsdp_phys;
-}
-
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Parse LAPIC entries in MADT
#ifdef __i386__
-static int __init disable_acpi_irq(struct dmi_system_id *d)
+static int __init disable_acpi_irq(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
return 0;
}
-static int __init disable_acpi_pci(struct dmi_system_id *d)
+static int __init disable_acpi_pci(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
return 0;
}
-static int __init dmi_disable_acpi(struct dmi_system_id *d)
+static int __init dmi_disable_acpi(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
/*
* Limit ACPI to CPU enumeration for HT
*/
-static int __init force_acpi_ht(struct dmi_system_id *d)
+static int __init force_acpi_ht(const struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",