cm_t35: use scf0403 driver

[karo-tx-uboot.git] / board / compulab / cm_t35 / cm_t35.c

diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index b9a996594fb0b256a2cb5b9dc1e3fb68c6b937a9..9f2937a9783cea35f5e91d442de9028f573156c6 100644 (file)
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -268,6 +268,9 @@ static void cm_t3x_set_common_muxconf(void)
        /* DVI enable */
        MUX_VAL(CP(GPMC_NCS3),          (IDIS  | PTU | DIS  | M4));/*GPMC_nCS3*/
 
+       /* DataImage backlight */
+       MUX_VAL(CP(GPMC_NCS7),          (IDIS  | PTU | DIS  | M4));/*GPIO_58*/
+
        /* CM-T3x Ethernet */
        MUX_VAL(CP(GPMC_NCS5),          (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
        MUX_VAL(CP(GPMC_CLK),           (IEN  | PTD | DIS | M4)); /*GPIO_59*/
@@ -374,6 +377,15 @@ static void cm_t3x_set_common_muxconf(void)
        MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | EN  | M0)); /*MMC1_DAT1*/
        MUX_VAL(CP(MMC1_DAT2),          (IEN  | PTU | EN  | M0)); /*MMC1_DAT2*/
        MUX_VAL(CP(MMC1_DAT3),          (IEN  | PTU | EN  | M0)); /*MMC1_DAT3*/
+
+       /* SPI */
+       MUX_VAL(CP(MCBSP1_CLKR),        (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+       MUX_VAL(CP(MCBSP1_DX),          (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+       MUX_VAL(CP(MCBSP1_DR),          (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+       MUX_VAL(CP(MCBSP1_FSX),         (IEN | PTU | EN  | M1)); /*MCSPI4_CS0*/
+
+       /* display controls */
+       MUX_VAL(CP(MCBSP1_FSR),         (IDIS | PTU | DIS | M4)); /*GPIO_157*/
 }
 
 static void cm_t35_set_muxconf(void)