ppc4xx: Big cleanup of PPC4xx defines

[karo-tx-uboot.git] / board / dave / PPChameleonEVB / PPChameleonEVB.c

diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index c715ad414a56a6a8f3dcfb483e5374c1249b5803..56751e1599509549bdbb7e6ae6bb0a9313be64e0 100644 (file)
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -38,8 +38,8 @@ int gunzip(void *, int, unsigned char *, unsigned long *);
 
 int board_early_init_f (void)
 {
-       out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
-       out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+       out32(GPIO0_OR, CONFIG_SYS_NAND0_CE);                 /* set initial outputs     */
+       out32(GPIO0_OR, CONFIG_SYS_NAND1_CE);                 /* set initial outputs     */
 
        /*
         * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -65,9 +65,9 @@ int board_early_init_f (void)
         * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
         */
 #if 1 /* test-only */
-       mtebc (epcr, 0xa8400000); /* ebc always driven */
+       mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 #else
-       mtebc (epcr, 0x28400000); /* ebc in high-z */
+       mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */
 #endif
        return 0;
 }
@@ -85,10 +85,10 @@ int misc_init_r (void)
 {
        /* adjust flash start and size as well as the offset */
        gd->bd->bi_flashstart = 0 - flash_info[0].size;
-       gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
+       gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
 #if 0
        volatile unsigned short *fpga_mode =
-               (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+               (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
        volatile unsigned char *duart0_mcr =
                (unsigned char *)((ulong)DUART0_BA + 4);
        volatile unsigned char *duart1_mcr =
@@ -101,10 +101,10 @@ int misc_init_r (void)
        int status;
        int index;
        int i;
-       unsigned long cntrl0Reg;
+       unsigned long CPC0_CR0Reg;
 
-       dst = malloc(CFG_FPGA_MAX_SIZE);
-       if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+       dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+       if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
                printf ("GUNZIP ERROR - must RESET board to recover\n");
                do_reset (NULL, 0, 0, NULL);
        }
@@ -168,7 +168,7 @@ int misc_init_r (void)
        /*
         * Enable power on PS/2 interface
         */
-       *fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
+       *fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
 
        /*
         * Enable interrupts in exar duart mcr[3]