Add GPL-2.0+ SPDX-License-Identifier to source files

[karo-tx-uboot.git] / board / davinci / dm6467evm / dm6467evm.c

diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c
index 994a9aae9fa701ce4a6d0ff02c3af7c527cdba63..469c9bac4b2fc580036315d916252557908576b6 100644 (file)
--- a/board/davinci/dm6467evm/dm6467evm.c
+++ b/board/davinci/dm6467evm/dm6467evm.c
@@ -1,35 +1,69 @@
 /*
  * Copyright (C) 2009 Texas Instruments Incorporated
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <nand.h>
 #include <asm/arch/nand_defs.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define REV_DM6467EVM          0
+#define REV_DM6467TEVM         1
+/*
+ * get_board_rev() - setup to pass kernel board revision information
+ * Returns:
+ * bit[0-3]    System clock frequency
+ * 0000b       - 27 MHz
+ * 0001b       - 33 MHz
+ */
+u32 get_board_rev(void)
+{
+
+#ifdef CONFIG_DAVINCI_DM6467TEVM
+       return REV_DM6467TEVM;
+#else
+       return REV_DM6467EVM;
+#endif
+
+}
+
 int board_init(void)
 {
        gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
        gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
+       lpsc_on(DAVINCI_DM646X_LPSC_TIMER0);
+       lpsc_on(DAVINCI_DM646X_LPSC_UART0);
+       lpsc_on(DAVINCI_DM646X_LPSC_I2C);
+       lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
+
+       /* Enable GIO3.3V cells used for EMAC */
+       REG(VDD3P3V_PWDN) = 0x80000c0;
+
+       /* Select UART function on UART0 */
+       REG(PINMUX0) &= ~(0x0000003f << 18);
+       REG(PINMUX1) &= ~(0x00000003);
+
+       return 0;
+}
+
+#if defined(CONFIG_DRIVER_TI_EMAC)
+
+int board_eth_init(bd_t *bis)
+{
+       if (!davinci_emac_initialize()) {
+               printf("Error: Ethernet init failed!\n");
+               return -1;
+       }
+
        return 0;
 }
+#endif /* CONFIG_DRIVER_TI_EMAC */
 
 #ifdef CONFIG_NAND_DAVINCI
 int board_nand_init(struct nand_chip *nand)